13-17-613 Page 3
SAFETY PRECAUTIONS
The following text presents common safety issues of which the user should be aware. Though the list below
includes unit and supporting equipment dangers present, the user must also be vigilant to other hazards
introduced in an industrial environment, and ensure they have received the necessary safety training.
Failure to observe these notices could result in injury to or death of personnel.
·
Keep fingers and clothing away from rotating fan, drive coupling, etc.
·
Disconnect the compressor unit from its power source, lockout and tagout before working on
the unit – this machine is automatically controlled and may start at any time.
·
Do not loosen or remove the oil filler plug, drain plugs, covers, the thermostatic mixing valve
or break any connections, etc., in the compressor air or oil system until the unit is shut down
and the air pressure has been relieved.
·
Electrical shock can and may be fatal.
·
Perform all wiring in accordance with the National Electrical Code (NFPA-70) and any
applicable local electrical codes. Wiring and electrical service must be performed only by
qualified electricians.
·
Open main disconnect switch, lockout and tagout before working on the control, wait 10
minutes and check for voltage.
Failure to observe these notices could result in damage to equipment.
·
Stop the unit if any repairs or adjustments on or around the compressor are required.
·
Do not use the air discharge from this unit for breathing – not suitable for human
consumption.
·
An Excess Flow Valve should be on all compressed air supply hoses exceeding 1/2 inch
inside diameter (OSHA Regulation, Section 1926.302).
·
Do not exceed the rated maximum pressure values shown on the nameplate.
·
Do not operate unit if safety devices are not operating properly. Check periodically. Never
bypass safety devices.
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...