13-17-613 Page 56
The
Communications
menu structure is organized as follows:
Refer to the
AirSmart G2 Modbus Manual (13-17-617)
for more information on communications and the
required settings.
5.4.7 I/O Mapping & Diagnostics
The
I/O Mapping & Diagnostics
menu allows the user to review the hardware address locations of the
various input and output devices for troubleshooting and diagnosing system problems.
The
I/O Mapping & Diagnostics
menu structure is organized as follows:
5.4.7.1 I/O Mapping
Accessibility
Maintenance
Distributor
Factory
The
I/O Mapping
screen allows the user to directly map the analog inputs (Ain), digital inputs (Din),
analog outputs (Aout), and digital outputs (Dout) through this menu. The function in each set has an
address, which directs the corresponding function to the desired input or output. The functions and
addresses are located in the correlating menu, which becomes visible when the factory password is
entered.
The controller can map input and output functions to unique input and output ports. System inputs
and outputs are addressed numerically. Each operating device in the system has a unique number
as shown in Table 5-3.
Table 5-3: Operating Device Numbers
Operating Device
Unit Number
AirSmart Controller Core Board
1
AirSmart Controller Expansion Board
2
Drive 1
3
Drive 2
4
Drive 3
5
Modbus Registers
6
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...