13-17-613 Page 39
5.1.7.3 AutoRun Mode
Accessibility
Maintenance
Distributor
Factory
The
AutoRun Mode
menu allows the user to configure the behavior of the AutoRun mode, which
can be set to Start/Stop mode or Secondary Pressure mode. When Start/Stop mode is selected, the
compressor will be started and stopped based on the
AutoRun Schedule
once the user has
enabled the compressor using the RUN button. If Secondary Pressures is selected, the
Secondary
Pressure Offset
setting will be applied according to the
AutoRun Schedule
, as long as the
compressor is running.
5.2 Maintenance
The
Maintenance
menu allows the user to change the timer settings related to oil, oil filter, and air
filters, as well as access the distributor contact information and document numbers pertaining to the
unit. Diagnostics screens are also provided for access to machine sensor readings and setpoints.
The
Maintenance
menu structure is organized as follows:
To enter the Maintenance menu:
1. From the
Home
screen, press the
Menu
button.
2. From the
Main Menu,
use the navigational buttons and select
Maintenance
.
3. Press the
Enter
button.
5.2.1 Counter/Timer Summary
Accessibility
Maintenance
Distributor
Factory
The first item in the
Maintenance
menu is the
Counter/Timer Summary
. This summary consists of a
bar chart that illustrates the seven system variables which are displayed on two timer summary
screens. These are the same screens that are accessible from the
Timers
link on the
Home
screen and
are described in detail in section 2.3.4. Figure 5-4 illustrates the first screen in the set.
Figure 5-4: Counter / Timer Summary Screen
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...