13-17-613 Page 9
2.2 Control Panel Indicator and General Navigation Button Functions
Figure 2-1: Control Panel Indicator and General Navigation Button Functions
2.2.1 LED Indicators and Stop Button
The Automatic LED (green) indicates that the compressor is capable of starting automatically, while the
Power LED (white) indicates that power has been applied to the compressor. The STOP button clears
a fault condition if the fault is not still active.
2.2.2 Button Navigation Functions
The display is controlled by seven navigation buttons. Four of these buttons are located to the right of
the display and three are located beneath it. The navigational buttons correspond to the functions
closest to them. For the example shown in Figure 2-1, Button A1 will navigate to the Distributor
Information screen, Button
A2
will navigate the user to the Notices screen, Button
A3
will navigate the
user to the Maintenance screen, and Button
A4
will navigate the user to the Menu screen. The buttons
below the display (
A5
and
A6
for the example) will navigate to the Previous and Next pages,
respectively. Each screen will have unique navigational controls as labeled by the display text.
Figure 2-1 shows an example of the Home screen display.
2.3 Operating Screens
The AirSmart G2 controller features a set of easily-accessible screens providing run-time information
about the machine's operating state and condition. These are available from the home screen without
logging in to the system and include sensor readings, gauges, notice history, and maintenance timer
information. This section describes the operating screens in detail.
Power
Automatic
A1
A2
A3
A4
A5
A6
A7
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...