13-17-613 Page 28
5 AirSmart Controller Menus
The AirSmart G2 Controller
Main Menu
is broken down into six areas of control, display, and
configuration. These sub-menus are: Operational Settings, Maintenance, Alarm History, Display Options,
and Machine Configuration.
The
Main Menu
structure is organized as follows:
The default values for the adjustable parameters are determined by the compressor model configuration
stored in the controller
’s memory. Most of these parameters can then be reconfigured if necessary by
accessing the appropriate submenu within the
Main Menu
. Section 5.1 details the functions and
parameter settings found within this top level menu.
The AirSmart G2 menus and functions are password protected, and availability is setup through a three
tiered accessibility structure: MAINTENANCE, DISTRIBUTOR, and FACTORY. Before the description of
each of the screens in the following section, there is an accessibility chart that shows the read/write
access of each of the users. Green represents read and write access, yellow represents read only
access, and red represents no access. For example, the following accessibility chart:
Accessibility
Maintenance
Distributor
Factory
This chart can be interpreted as: Maintenance has no access; Distributor has read only access; and
Factory has full read and write access.
5.1 Operational Settings
The
Operational Settings
menu allows the user to: 1) access operating modes, 2) change passwords,
3) view and adjust load and unload setpoints, 4) change inlet valve control, 5) view and adjust timer
setpoints, 6) change the current date/time, 7) view and adjust operating limits, and 8) configure the
AutoRun schedule function. The
Operational Settings
menu is the primary location for most of the
compressor limits and unit settings.
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...