Gambro COBE 2991, Справочник по основам

Страница: 215 / 273

Loading the Starting Cell Product
COBE 2991 Cell Processor • Essentials Guide 6-17
P
rocessing
and C
o
mmon
Operations
6
Figure 6-15: Fluid level above the rotating seal
5
If desired, rinse the cell product bag (to avoid cell loss) by doing the following:
a Place a clamp on the clear tubing between the junction manifold and the
RCD.
b Place the cell product bag on the tabletop (Figure 6-17 on page 6-19).
c Press the PREDILUTE button and allow the desired volume of
processing/wash solution to fill the cell product bag.
d Press the STOP RESET button and manually agitate the cell product
bag.
e Hang the cell product bag on the left hanger bar.
f Press the BLOOD IN button, let the cell product bag empty, then press
the STOP RESET button.
6
Reset the CENTRIFUGE SPEED control to the appropriate setting,
according to the protocol.
7
Proceed to “Processing” on page 6-26.
Fluid level