Gambro COBE 2991, Справочник по основам

Страница: 128 / 273

vi COBE 2991 Cell Processor • Essentials Guide
The COBE 2991 Cell Processor Operator’s Manual
The COBE 2991 Cell Processor Operator’s Manual is a set of two guides:
• COBE 2991 Cell Processor Essentials Guide
• COBE 2991 Cell Processor Protocols Guide
The Essentials Guide is described in more detail below. The Protocols Guide is described in more detail on page
vii.
Who Should Read This Manual
The COBE 2991 Cell Processor Operator’s Manual is written for COBE 2991 operators.
The COBE 2991 Cell Processor Essentials Guide
The COBE 2991 Cell Processor Essentials Guide contains the following chapters:
Chapter 1: Introduction
Chapter 1 introduces the COBE 2991, including a system and cell processing overview.
Chapter 2: COBE 2991 Variations
Chapter 2 describes the different versions of the COBE 2991.
Chapter 3: Operator Controls
Chapter 3 explains the controls found on both the main and the secondary control panels.
Chapter 4: LED Programming
Chapter 4 explains how to program COBE 2991s equipped with an LED program board.
Chapter 5: Pin-Diode Programming
Chapter 5 explains how to program COBE 2991s equipped with a pin-diode program board.
Chapter 6: Processing and Common Operations
Chapter 6 explains processing and common operations. It provides a generic overview of connecting the
starting cell product and solutions, predilution, loading, processing and unloading. It also includes recovery
procedures and instructions for priming the hydraulic system. For instructions regarding specific protocols,
refer to the
COBE 2991 Cell Processor Protocols Guide .
Chapter 7: Troubleshooting
Chapter 7 explains how to troubleshoot common problems.
Chapter 8: General Maintenance
Chapter 8 explains how and when to perform operator maintenance on the COBE 2991.
Chapter 9: Specifications
Chapter 9 provides the specifications for the COBE 2991.
Glossary
The glossary defines terms specific to the COBE 2991 and cell processing.