G-Technology G-RACK 12 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 296

G-Technology G-RACK 12 Скачать руководство пользователя страница 76

Administrative Tool

p. 76

enable read/write/execute for Others in the ACL options. (This can be set for child folders only)

Use these steps to mount and allow users to write to the share.
1.  Go through Wizard > Media > Both setup and enable NFS protocol
2.  After creating shares and logging in, navigate to Connect > NFS
3.  Edit share and change client IP
4.  In extra options change secure to insecure and save
5.  Navigate to Access Control > Workspaces and open up ACL options
6.  Change Others to Read/Write/Execute and save
7.  On mac client open up ‘Connect to Server’ (can hit k)
8.  Enter url for server: nfs://grack_ip/export/share_name

NFS share will mount and folder that had Others enabled to Read/Write/Execute will allow write
ability.

«
...
74
75
76
77
78
...
»

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов