manualshive.com logo in svg

G-Technology G-RACK 12, Руководство пользователя, Страница: 219 / 296

Поделиться
Скачать
G-Technology G-RACK 12 Скачать руководство пользователя страница 219

Use Cases/Tutorials

p. 219

Troubleshooting

Recovering from degraded state (How to replace a failed data physical disk?)

1.  Detect the failed drive

• 

You will receive notification via email with the name of the  failed drive.

• 

The tray LED will be red.

• 

Filesystem health widget in Dashboard will change the status of the corresponding RAID from 
„good“ to „degraded“.

• 

Refer to the Physical Disks under the Storage menu. Find the name of the drive to know the 
number of the disk slot.

2.  Pull out the failed drive
3.  Pull in a brand new one
4.  Go to the G-RACK 12 Administrative tool, click on the Storage tab and then the RAID tab

5.  Select the degraded RAID array
6.  Click the Hot Spare button
7.  The list of the devices will contain the name of the new drive. Select it.  Save
8.  Wait for the RAID array to get balanced. This process will be performed automatically by the 

G-RACK 12.

NOTE: There is a delay between adding a hot spare and the recovery process beginning. It can take 
up to a minute.

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов