manualshive.com logo in svg

G-Technology G-RACK 12, Руководство пользователя, Страница: 261 / 296

Поделиться
Скачать
G-Technology G-RACK 12 Скачать руководство пользователя страница 261

F.A.Q.

p. 261

wrote around 24 million files of different size and layout. XFS takes 430 seconds to complete the 
operations and it was performance bound by its log system; EXT4 took 200 seconds to complete 
the test, and its limit comes from the fixed inode locations. Both limits are the results of their design, 
and overcoming of those limits was one of the original goal of BTRfs. Did they succeed? The same 
test took 62 seconds to be completed on BTRfs, and the limit was the CPU and Memory of the test 
system, while both XFS and EXT4 were able to use only around 25% of the available CPU because 
they were  quickly IO bound.

The main BTRfs features available the G-RACK 12 include:

• 

Extent based file storage

• 

2^64 byte == 16 EiB maximum file size (practical  limit is 8 EiB due to Linux VFS)

• 

Space-efficient packing of small files

• 

Space-efficient indexed directories

• 

Dynamic inode allocation

• 

Writable snapshots, read-only snapshots

• 

Subvolumes (separate internal filesystem roots)

• 

Checksums on data and metadata (crc32c)

• 

Compression (zlib and LZO)

• 

Integrated multiple device support

• 

File Striping, File Mirroring, File SMirroring, Striping with Single and Dual Parity 
implementations (RAID-5 and RAID-6)

• 

Background scrub process for finding and fixing errors on files with redundant  copies

• 

Online filesystem defragmentation

• 

Offline filesystem check.

• 

Subvolume-aware quota support

• 

Online filesystem check

BTRfs Links and references

Informative Links about BTRfs:

• 

https://www.reddit.com/r/btrfs/

• 

https://btrfs.wiki.kernel.org/index.php/Main_Page

• 

https://en.wikipedia.org/wiki/Btrfs

• 

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов