G-Technology G-RACK 12, Руководство пользователя, Страница: 207 / 296

Use Cases/Tutorials
p. 207
Local RSync Config
To setup a local RSync job to copy an existing workspace to a new destination on the GRack:
•
Navigate to Connect > Rsync
• Click + icon to add a new job
• Choose job type as Local
• Select the Source workspace to Copy to a new destination
• Select the Destination workspace
• Choose settings you would like ( archive, set time/data )
• Create Job
This Job will now execute at the specified time or you can manually start the job.
Remote RSync Config
Remote RSync will require a module to be setup on the remote location. This Module will be the
source to push or pull from.
To setup a module on GRack:
•
Navigate to Connect > Rsync
• Click Server Tab
• Toggle on the Enable switch
• Click Modules Tab
• Click + button
• Choose the source workspace or create a new workspace
• Choose settings you would like ( User authentication, read/write only, Host allow/deny)
• Click Save
RSync module is now setup
Push RSync Config
To setup a remote RSync job to copy a local workspace to a remote location ( 2nd GRack or a
different server or client computer )
•
Navigate to Connect > RSync
• Click + icon to add a new job
• Choose job type as remote
• Choose mode as Push
• Choose the source folder ( This folders data will be “Pushed” to the destination )
• Enter the Destination
• Without user authentication
• Enter the destination IP follow by Module e.g 192.168.1.128::ModuleName
• With user authentication
• Enter the Username followed by destination and Module e.g