manualshive.com logo in svg

G-Technology G-RACK 12, Руководство пользователя, Страница: 202 / 296

Поделиться
Скачать
G-Technology G-RACK 12 Скачать руководство пользователя страница 202

Use Cases/Tutorials

p. 202

What make and model of CPU does the G-RACK 12 have?

The G-RACK 12 comes equipped with Intel Xeon E5-2600 (V3) CPUs. More detail can be found online:

http://ark.intel.com/products/family/78583/Intel-Xeon-Processor-E5-v3-Family#@All

How do I create a new RAID device?

• 

Navigate to the Storage>RAID tab.

• 

Press the Create button (+)

• 

Create a name

• 

Select a RAID level

• 

Select the storage devices that will contain the RAID.

• 

Once the RAID is created can assign a Workspace to it and give users access rights.

How to a create an iSCSI volume?

Set RAID, and then volume - set quota if necessary
Then create iSCSI target. You will get a LUN auto created size 1 TB. Manage the size of this LUN or 
create new ones

How to change RAID level?

RAID levels are set at the time you set up your Workspaces. In order to make a change to an existing 
RAID set do the following:
• 

Backup the data on the current RAID.

• 

Delete old RAID. When you do this the existing data is gone.

• 

Create new RAID with the desired level.

• 

Set volumes and Workspaces as you need.

• 

Restore the data back to the new RAID on the appropriate Workspace and establish access for 
users..

How to create a new user?

• 

Navigate to the Access Control>Users menu.

• 

Obeying the naming rules: Make sure the name is unique in the system and will not to cause a 
conflict with Active Directory users and groups, and their permissions.

• 

Press the Add button (+).

• 

Enter user information.

• 

Press Save.

How to access an FTP shared workspace?

• 

To access and FTP share the user will use a GUI tool called an FTP client or the CLI built into the 

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов