manualshive.com logo in svg

G-Technology G-RACK 12, Руководство пользователя, Страница: 252 / 296

Поделиться
Скачать
G-Technology G-RACK 12 Скачать руководство пользователя страница 252

Troubleshooting

p. 252

workspace, all files added to workspace should have same permissions. There is a known conflict 
between the two methods that cause this to not work.

Permissions Not Inherited From Client Computer

A file on a client computer has rw-r--r-- unix permissions, when added into shared workspace 
through NFS the permissions follow. It does not inherit the permissions that the workspace was 
created with.
Causes usability issues when used with other protocols. Note: This can happen on SMB/CIFS also.

Workaround: After uploading files and folders to shared workspace through the different protocols, 
go to Workspaces tab and open up Permissions view for the workspace and hit Apply with recursive 
toggled on. Do it on top level workspace and permissions will  apply throughout.
workspace, all files added to workspace should have same permissions. There is a known conflict 
between the two methods that cause this to not work.

Permissions Not Inherited From Client Computer

A file on a client computer has rw-r--r-- unix permissions, when added into shared workspace 
through NFS the permissions follow. It does not inherit the permissions that the workspace was 
created with.
Causes usability issues when used with other protocols. Note: This can happen on SMB/CIFS also.

Workaround: After uploading files and folders to shared workspace through the different protocols, 
go to Workspaces tab and open up Permissions view for the workspace and hit Apply with recursive 
toggled on. Do it on top level workspace and permissions will  apply throughout.

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов