G-Technology G-RACK 12 Скачать руководство пользователя страница 149 | Manualshive

Страница: 149 / 296

G-Technology G-RACK 12 Скачать руководство пользователя страница 149

Hardware Description

p. 149

Accessing the Inside of the Chassis

Some maintenance will require accessing the inside of the server.

1.  Remove the two screws from the sides of the chassis cover.
2.  Press both release tabs at the same time to unlock the cover.
3.  Slide the cover toward the rear of the chassis.
4.  Lift the cover off the chassis.

Removing the Chassis Cover

Installing Hard Drives

The G-RACK 12 chassis supports twelve hot-swappable 3.5” hard drives, which may be removed
without powering-down the system. The drives are mounted in drive carriers to simplify their
installation and removal from the chassis. These carriers also help promote proper airflow for the
drive bays.

«
...
147
148
149
150
151
...
»

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов