manualshive.com logo in svg

G-Technology G-RACK 12, Руководство пользователя, Страница: 157 / 296

Поделиться
Скачать
G-Technology G-RACK 12 Скачать руководство пользователя страница 157

Hardware Description

p. 157

Power Distributor

Chassis that are 2U or more in height require a power distributor. The power distributor provides fail 
over and power supply redundancy

Changing the Power Distributor
1.  Power down the server, lay the chassis on a flat, stable surface and remove the chassis cover.
2.  Remove all cable connections to the power supply from the motherboard, backplane, and other 

components.

3.  Remove both power supplies.
4.  Locate the power distributor between the power supply and the fan row.
5.  Remove the three screws securing the power supply.
6.  Gently pull the power distributor from the chassis, carefully guiding all the cables through the 

power distributor housing.

7.  Slide the new power distributor module into the power distributor housing. Make that you slide 

the cables through the bottom of the housing.

8.  Reconnect all the power cables, replace the power supply, and insert the plug into the wall.

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов