G-Technology G-RACK 12 Скачать руководство пользователя страница 105

Страница: 105 / 296

Administrative Tool

p. 105

Import groups

To create multiple groups , use “Import” option.

NOTE:

The manually assigned uid’s must start off at 1000 or higher, otherwise they will not appear in

the list.

Delete

Hightlight the desired group and press the Delete button. Confirm in the dialogue window.

NOTE:

Deleting a group will not affect user data.

Refresh

The Refresh button will reload the screen and display any new or updated information about groups.

NOTE:

Newly created groups will appear automatically. Refresh button will display any new or

updated information about the already existing groups. It may take a few minutes to update the
information.

Содержание G-RACK 12









































































































































































































































































































Результаты поиска

Содержание G-RACK 12

Отзывы:

G-Technology G-RACK 12, Руководство пользователя, Страница: 105 / 296

Результаты поиска

Содержание G-RACK 12

Отзывы: