G-Technology G-RACK 12, Руководство пользователя

Страница: 100 / 296

Administrative Tool
p. 100
MaxOutstandingR2T The maximum number of outstanding R2Ts. The
responder’s value is used. The result function is
Min.
DataPDUInOrder No indicates that the data PDUs within a sequ-
ence can be in any order. Yes indicates that the
data PDUs within a sequence have to be at con-
tinuously increasing addresses and that overlays
are forbidden. The result function is OR.
DataSequenceInOrder If set to No, the data PDU sequence may be
transferred in any order. If set to Yes, the sequ-
ence must be transferred using continuously
increasing offsets except for error recovery. The
result function is OR.
ErrorRecoveryLevel Recovery levels represent a combination of
recovery capabilities. Each level includes all
the capabilities of the lower recovery level. The
result function is Min.
OfMaker Turns on or off the initiator-to-target markers.
The result function is AND
IfMaker Turns on or off the initiator-to-target markers.
The result function is AND
OfMarkInt The interval value (in 4-byte words) for initia-
tor-to-target markers, measured from the end
of one marker to the beginning of the next. The
offer can have only a range; the response can
have only a single value (picked from the offe-
red range) or Reject.
IfMarkInt Interval value (in 4-byte words) for target-to- ini-
tiator markers. The interval is measured from the
end of one marker to the beginning of the next
one. The offer can have only a range; the respon-
se can have only a single value (picked from the
offered range) or Reject.