G-Technology G-RACK 12 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 296

G-Technology G-RACK 12 Скачать руководство пользователя страница 56

Administrative Tool

p. 56

Grow RAID device

Select devices to be added to the RAID device. The list will display unassigned physical drives.
Remember to perform balance on any modification of RAID structure.

The following table describes the labels on the screen:

Name

The name of the RAID

Level

The level of the RAID

Devices

Choose physical drive to join the RAID array

NOTE:

Remember to perform balance on any modification of RAID structure.

For best practice we recommend using all drives of the same capacity. If your system happens to
have drives of different capacities, please make sure to have drive of the same capacity within one
RAID. This approach will help to ensure data integrity and security, it’s also associated with correctly
storing and fetching the data.

Remove devices from RAID

Select devices to be removed from the RAID device. Repeat the steps if you need to remove more
than one physical drive.

«
...
54
55
56
57
58
...
»

Содержание G-RACK 12









































































































































































































































































































Отзывы:

Нет отзывов