Fujitsu PRIMEPOWER650, Руководство пользователя

Страница: 147 / 195

U41261-J-Z816-4-76 117
5.3 DAT Drive (DDS4)
(3) Eject Button
Press the Eject button to remove the data cartridge. Before removing a data cartridge,
make sure that the tape LED is dark.
If the DAT Software (or operating system) has disabled removal of a data cartridge,
the cartridge cannot be removed by pressing the Eject button.
(4) Data Cartridge Slot
5.3.2 Setting the SCSI ID
Set the SCSI ID of the DAT drive to “5”.
Table 5.1 DAT drive LED indicators
LED
DAT Drive Status
Tape Clean
Dark Dark Data cartridge is not loaded.
Lit Data cartridge is loaded.
Blinking
(1/2 sec interval) Tape is loading / unloading, or drive diagnostics
are running.
Blinking
(1/4 sec interval) Accessing tape. ( Read / Write )
(any) Lit Drive has malfunctioned.
Blinking
(1/2 sec interval) Tape head needs to be cleaned or replaced.
Data destruction
Do not press the Eject button during operation (when the tape LED is blinking). If
the Eject button is held down for about five seconds, the forced ejection function
will execute, and any data being written may be lost.
Equipment damage/Data destruction
Put only recommended data cartridges in the data cartridge slot. Any other type of
foreign object may damage the unit or cause data to be lost.