Copy Source Directory
Copy Destination Directory
$BAK_DIR\ESC\Manager\var\opt\FJSVssmgr\current
\opencimom\logr
$TMP_DIR\ESC\Manager\var\opt\FJSVssmgr
\current\opencimom\logr
3.
Restore the files related to the performance management function.
This step can be skipped if you are not using the performance management function or the files related to the performance
management function are not backed up.
Using Explorer or a similar program, delete the subdirectories and files belonging to the following restore destination directory.
However, be sure not to delete the restore destination directory itself. If the restore destination directory itself does not exist,
create it.
-
$TMP_DIR\ESC\Manager\var\opt\FJSVssmgr\current\perf
Using Explorer or a similar program, copy the following file from its backup location.
Copy Source File
Copy Destination Directory
$BAK_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\perf.conf
$ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr
\current
Using Explorer or a similar program, copy the subdirectories and files belonging to the following directory from their backup
location.
Copy Source Directory
Copy Destination Directory
$BAK_DIR\ESC\Manager\var\opt\FJSVssmgr\current\perf
$TMP_DIR\ESC\Manager\var\opt\FJSVssmgr
\current\perf
After copying, edit perf.conf (performance management definition file).
What is edited is as follows:
MONITORING_SIZE
The number of devices whose performance is being monitored is specified in decimal format.
Set the MONITORING_SIZE parameter to 0 (zero).
MONITORING_NUMBER
The information for the device whose performance is being monitored and the valid/invalid values for threshold monitoring
are set up.
Delete all the lines of MONITORING_
number
parameters.
[Before editing]
#Tue Nov 05 20:11:02 JST 2013
PERF_DATA_KEEP_DAYS=7;
LOG_ROTATION=2;
MONITORING_SIZE=1
MONITORING_0=1.3.6.1.4.1.211.1.21.1.100@00ETERNUSDXMS0ET410SA#####KP1234567890##:
30,0,63,Thresholds_Enable
[After editing]
#Tue Nov 05 20:11:02 JST 2013
PERF_DATA_KEEP_DAYS=7;
LOG_ROTATION=2;
MONITORING_SIZE=0
Note
If there is no ENABLED_ECO_MODE or ENABLED_PORT_ISCSI parameter definition in the perf.conf file, add the definition after
migration.
- 312 -