-
For installing the AdvancedCopy Manager Copy Control Module:
"Operating Environment of AdvancedCopy Manager CCM"
Required Disk Space for Previous Version
The space required to install previous version of the ETERNUS SF Manager or the AdvancedCopy Manager Copy Control Module. Refer
to the following locations in the
ETERNUS SF Installation and Setup Guide
for the relevant previous version for information on the
required disk space.
-
When using the AdvancedCopy Manager Copy Control Module included in the ETERNUS SF Manager Program
"Operating environment of the ETERNUS SF Manager"
-
When installing and using the AdvancedCopy Manager Copy Control Module Program
"Operating environment of the AdvancedCopy Manager CCM"
9.6.1.2 Performing Upgrade (for Windows)
Refer to "
to perform the upgrade.
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.
1.
Install the target version.
2.
If the installation is successfully completed, continue from "
9.6.1.3 Tasks to Be Performed After Upgrade
9.6.1.3 Tasks to Be Performed After Upgrade
9.6.1.3.1 Restoring Environment Setting Files
With the following procedure, restore the operation environment of the previous version of the AdvancedCopy Manager Copy Control
Module. Note that if step 1 and step 2 have already been performed, perform from step 3.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-ROM
structure and detailed contents.
3.
Implement restoration of the previous version.
Execute the following batch file. For
backupDir
, specify the directory in which the backup data is stored with an absolute path.
dvdromDrive:\Manager_windows\vuptools\esfccmpostinst.bat backupDir
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory name.
-
The number of characters in a directory name must be up to 220.
4.
Eject the DVD-ROM.
9.6.1.3.2 Deleting Backup Data
Once normal operation has been confirmed after the upgrade, the backup data in the backup destination directory created in step 3
of "
9.6.1.1.1 Backing Up Environment Setting Files
- 188 -
