Fujitsu ETERNUS SF Express V16.6 Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 378

Fujitsu ETERNUS SF Express V16.6 Скачать руководство пользователя страница 146

-

When requested to restart the computer, click No.
If Yes is clicked, the upgrade is interrupted. When re-executing the installation after a restart of the computer, the installation is
treated as new one.

-

When the uninstallation completes successfully, the Uninstallation was completed successfully page may be displayed.
Although the instruction on the page indicates the deletion of files and folders, do not delete files and folders when performing
the upgrade.

Information

When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below:

1.

Install the target version.

2.

If the installation is successfully completed, continue from "

8.1.4 Tasks to Be Performed After Upgrade

For non-clustered systems, perform "

8.1.4 Tasks to Be Performed After Upgrade

Refer to "Preparations for Customizing Management Server Transactions" and "Customization for Management Server Transaction" in
the

ETERNUS SF Cluster Environment Setup Guide

for this version for clustered systems. Then, perform "

8.1.4 Tasks to Be Performed After

" afterwards.

8.1.3 Performing Upgrade (for Solaris, Linux)

Refer to "

C.2 Procedures for Upgrade Installation of Manager Feature of Express / Storage Cruiser / AdvancedCopy Manager Version 14.x

and 15.x (for Solaris, Linux)

" to perform the upgrade.

Information

When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below:

1.

Install the target version.

2.

If the installation is successfully completed, continue from "

8.1.4 Tasks to Be Performed After Upgrade

For non-clustered systems, perform "

8.1.4 Tasks to Be Performed After Upgrade

Refer to "Preparations for Customizing Management Server Transactions" and "Customization for Management Server Transaction" in
the

ETERNUS SF Cluster Environment Setup Guide

for this version for clustered systems. Then, perform "

8.1.4 Tasks to Be Performed After

" afterwards.

8.1.4 Tasks to Be Performed After Upgrade

8.1.4.1 Restoring Environment from Previous Version

With the following procedure, restore the operational environment that was backed up in "

8.1.1.1 Backing Up Operational Environment

of Previous Version

1.

Execute the following command to start the ETERNUS SF Manager services.

-

For Windows

$INS_DIR\Common\bin\Start_ESFservice.bat

The $INS_DIR is the program directory specified at the ETERNUS SF Manager installation.

-

For Solaris or Linux

/opt/FJSVesfcm/bin/startesf.sh

- 122 -

«
...
144
145
146
147
148
...
»

Содержание ETERNUS SF Express V16.6



























































































































































































































































































































































































Отзывы:

Нет отзывов