If Backup Operation Has Been Done
1.
Check the data size of the backup management list under the following directory:
-
If the Managed Server is in a non-cluster environment
environmentDir
\etc\backup\data
-
If the Managed Server is in a cluster environment
<
Drive letter of shared disk for shared data for AdvancedCopy Manager
>:\etc\opt\swstorage\etc\backup\data
If you were backing up Symfoware databases, also check the file sizes in the target directory for output of the recovery control
file.
2.
Save the device.ini file.
Save the following file by using the copy command.
For Non-clustered Systems
File for Save
File Name
device.ini
environmentDir
\etc\device.ini
For Clustered Systems
File for Save
File Name
device.ini
<
shared disk
>:\etc\opt\swstorage\etc\device.ini
3.
Save the backup management list.
Specify the directory which can store the data size checked in step 1 and execute the following command:
C:\> programDir\bin\swstresback saveDir
See
Refer to the manuals according to the previous operating environment's version for information on the command.
-
In the case of Version 14.2 or earlier
"swstresback (Resource backup command)" in the
ETERNUS SF AdvancedCopy Manager Operator's Guide
.
-
In the case of Version 15.0 or later
"swstresback (Resource backup command)" in the
ETERNUS SF AdvancedCopy Manager Operation Guide
.
4.
Save pre-processing and post-processing scripts and specification files.
Save the following files by using the copy command:
-
Pre-processing and post-processing scripts for backup management function
-
Transaction volume locking specification file for backups
-
Backup volume locking specification file for backups
-
Backup-restored volume locking specification file
Information
The volume locking specification files might not exist according to the environment. In this case, it is unnecessary to save
them.
For Non-clustered Systems
- 277 -
