202B1263075
(1) Attach the balloon according to “3.3.3 Mounting the
Endoscope Balloon.”
(2) Attach a hood (DH-17EN) onto the distal end of
endoscope.
Insert the endoscope until it reaches the end of the hood.
[Note]
Attach a hood onto the dry distal end of endoscope.
(3)
Attach a fixing rubber.
<When the ST-01B fixing rubber setting tool is used>
Attach the fixing rubber onto the hood using the fixing
rubber setting tool (ST-01B).
[Note]
Carefully attach the fixing rubber so as not to cover the
balloon air feed outlet.
< When the ST-10 fixing rubber setting tool (optional item) is
used>
Attach the fixing rubber onto the hood using the fixing
rubber setting tool (ST-10).
[Note]
Carefully attach the fixing rubber so as not to cover the
balloon air feed outlet.
(4)
Make sure the hood is fixed correctly.
Chapter 3 Preparation and Inspection Before Use
58
EI580BT_E2-10_202B1263075.indb 58
2015/08/12 16:20:38