manualshive.com logo in svg

FujiFilm EI-580BT, Руководство по эксплуатации, Страница: 22 / 114

Поделиться
Скачать
FujiFilm EI-580BT Скачать руководство пользователя страница 22

202B1263075

1.6  Possible Combinations for Use

1.6.1  Accessories

Use this product in combination with the accessories described in “Main Specification”.

WARNING

Do not use the endoscope in combination with accessories other than 
those described in this manual. Otherwise, it is unable to ensure its 
functionality, and creates a risk of patient injury or equipment damage.

[Note]  For details on how to use accessories, refer to each operation manual of accessories.

CAUTION

Do not press the hood against the digestive tract wall with undue force. 
It may damage mucous membrane.

Fix the hood securely to the endoscope before use. Otherwise, the 
hood may drop.

1.6.2  Compatible Video Processor and Light Source

This product is used in combination with the VP-4450HD video processor and XL-4450 
light source or with the VP-7000 video processor and BL-7000 light source.
Do not use this product in combination with the video processors or light sources other than 
above.

22

Chapter 1  Precautions

EI580BT_E2-10_202B1263075.indb   22

2015/08/12   16:20:30

Содержание EI-580BT



















































































































Отзывы:

Нет отзывов