FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 222 / 250

6
FUNCTION - DVE SETUP menu
Submenu
Parameter Default Setting Range Refer to
PRESET PATTERN
CROP
SET
8-2-4
T+B 0 0 to 100.0
L+R 0 0 to 100.0
ALL 0 0 to 100.0
KF DIR NORMAL NORMAL, REVERS
6-9-9
TRANS EDGE OFF OFF, ON
ROT STEP 1000 360, 1000, 4000
FILTER MODE1 MODE1/MODE2
FUNCTION - GPI/TALLY menu
Submenu
Description Refer to
1. TALLY COLOR Sets tally output color.
16-1
2. GPI IN Sets GPI input pin assignments.
3. GPI/TALLY OUT Sets GPI output pin assignments.
4. TALLY1 Sets tally1 to output pin assignments.
5. TALLY2 Sets tally2 to output pin assignments.
6. TALLY3 Sets tally3 to output pin assignments.
7. TALLY4 Sets tally4 to output pin assignments.
8. TALLY5 Sets tally5 to output pin assignments.
SELECT Selects submenus (Press F1 or the DOWN button to select submenus).
FUNCTION - EDITOR menu
Submenu
Parameter Default Setting Range Refer to
PARITY ODD NONE, ODD, EVEN
16-5
BAUD 38400 9600, 19200, 38400
TYPE GVG100 GVG100, BVS3K
DELAY ON ON, OFF
ENABLE OFF ON, OFF
SELECT BVS3K ME ME, PVW, ALL, ME ON, PVW ON
WIPE
GVG100 NORMAL NORMAL, LIST
BVS3K NORMAL NORMAL
XPT CTRL INPUT INPUT, BUTTON
PATT SELECT ON ON, OFF
KEYER CTRL ON ON, OFF
FUNCTION - GMATT menu
Submenu
Parameter Default Setting Range Refer to
MON OUT AUX7 AUX7 - 10
5-3
GMATT COLOR 5 2 to 5
SOFT LEVEL 0.0 0.0 to 150.0
GRAD PATTERN - 0 to 99
ASPECT
See section 6-7-2 "WIPE MODIFY Menu."
POSITION X, Y
ANGLE
MULTI X,
Y
FUNCTION - COLOR CORRECTION (1/4) menu
Submenu
Parameter Default Setting Range
CC CONTROL
（
See section14
）
MODULE ME1 BG ME1 BG, ME1KEY, ME2 BG ME2KEY, AUX
CHAN CH1 CH1, CH2
TYPE INPUT BUS, INPUT, BUTTON
SELECT
MODULE ME1 BG ME1KEY ME2 BG ME2KEY AUX
TYPE=BUS
M/E1PGM
M/E1PST
M/E1
KEY1-3
M/E2PGM
M/E2PST
M/E2
KEY1-3
AUX1 -
10
TYPE=INPUT
BLACK, IN01 - 16, IN17 - 28(option), MATT1, MATT2,
WHITE, COLBAR, STILL1 - 4, STILL5-6 (option)
TYPE=BUTTON BUTTON1-34
CC CONTROL
Parameter Default Setting Range Refer to
ENABLE OFF ON/OFF
14-3
INIT OFF OFF, PROC, CC LV, CLIP, ALL