FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 55 / 250

41
5-1-5. Changing the Signal Name
Video signals that can be assigned to the M/E bus are video signals input from the MU rear
panel, STILL1 to 6, MATT1, MATT2, BLACK, WHITE, and color bar internal signals. Any
names can be assigned to these signals. In the default settings, for instance, video input 1
from the rear panel is set as IN01. Follow the procedure below to change the signal names.
 Press the MU SETUP button to display the MU SETUP top menu.

Turn F1 to select 2 (INPUT). Press F1 or DOWN button to display the MU
SETUP-INPUT menu.

Turn F1 to select the signal whose name will be changed under the SIGNAL item in the
MU SETUP – INPUT menu. In the default setting, the names under the SIGNAL item and
SIGNAL NAME are virtually identical (see the table below).
SIGNAL Description
BLACK Black signal
IN01 to IN28
MU rear panel inputs 1 to 16
(17 to 28 added when input option installed)
STILL1 to STILL6
Still pictures 1 to 4
(5 and 6 are added when HVS-38SS option installed.)
MATT1, MATT2 BUS MATT Color signal
WHITE White signal
CB Color bar signal
M/E1 Re-entry signal

Press F2 to enter the rename mode. The signal name can contain 4 characters x 2 lines.
The name is set by entering a character at a time. Select the position using the RENAME
item (F2), and then use the CHARA item (F4) to select the characters. Alphanumeric
characters and symbols can be used (ASCII code). To change the character type, use the
CHANGE item (F3).
To change another signal name, repeat steps
③
and
④
.

Press F2 to enable the renamed signal name.
MU SETUP INPUT(1/2)
BLACK
IN01
IN02
IN03
IN04
SIGNAL
IN01
RENAME
0
BLAK
IN01
IN02
IN03
IN04
CHANGE
BIG
CHARA
'I'
IN05
IN06
IN07
IN08
IN09 IN05
IN06
IN07
STLL1
STLL2
PNL EN
OFF
PNLSEL
BLACK