FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 116 / 250

102
Menu
button
Menu Description Reference/Note Menu button
SUB
EFFECT
NEGA Sets polarization effect. 8-2-8
MOSAIC Sets mosaic effect.
8-2-8
Unable to use with
MULTI warp type.
PAINT Y-Lv, C-Lv, Y/C-Lv
Sets resolution for
luminance /
chrominance
8-2-8
DEFOCUS
SELECT,
LEVEL (H-Lv, V-Lv,
H/V-Lv)
Sets defocus effect.
FREEZE
Sets the DVE image
frozen.
STROBE RATE
Sets kind of strobe rate
applied
HILITE
HILITE
POSITION, WIDTH
TYPE,
COLOR (SAT, LUM,
HUE)
Sets hilite position and
color.
8-2-9
Unable to use with
some warp types.
SHADOW
SELECT,
SOFT,
X, Y,
LEVEL
Sets shadow position,
density and softness
8-2-9
The UP and DOWN buttons can be used to move between menus.
* BEVEL, the one of the WARP effect, can be used without an additional option.
8-1-1. Re-initializing DVE MODIFY Menu
To initialize the DVE MODIFY menu, use any one of the procedures below.

Removing modified preset patterns from the menu
Using the DVE PATTERN menu or PATTERN SELECT menu, remove the patterns for which
modify settings have been performed from the DVE PATTERN list (25 patterns in 5 groups).
All the modify data of the patterns is now lost, and all the settings are returned to their
defaults even when the same pattern is selected again.
The procedures below serve to re-initialize the data of the DVE MODIFY menu assigned to
the buses. (Use the keypad to check which of the buttons for the PGM, PST, KEY1, KEY2
and KEY3 buses are lighted up orange.)

Using WIPE POS and DEF Buttons in the Joystick Section
When using a modified pattern, press the WIPE POS button next to the joystick to light on.
Then press and hold down the DEF button for a while. All settings in the DVE MODIFY menu
return to factory default.

Using a USER button
At first assign the DVE MODIFY RESET function to a desired USER button, (See section
15-2 "USER Buttons" for details.) and then press the respective USER button. The DVE
MODIFY data will return to factory default settings.

Using INIT item in the DVE MODIFY top menu
（
HVS-12ROUA only
）
In the DVE MODIFY top menu, turn F6 to change to ALL or other from OFF. Then press F6 to
return the selected items to the default settings.