FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 141 / 250

127
10-3. User Pattern Control
10-3-1. Executing User Patterns
User patterns can be modified and the modified user patterns can be also assigned to buses
and executed in the same way as DVE preset patterns. When the numbers 1 to 50 in the
USER PATTERN menu are assigned to a bus as a pattern, they become numbers 401 to
450.
10-3-2. Modifying Created User Patterns
The following procedure is used to modify created user patterns in the same way as DVE
patterns.
 Select the user pattern. (See section 11-2-1. "Displaying the USER PATTERN Menu.")

Select the channel. (See section 10-2-4. "Selecting the DVE Channel.")

Select the keyframe to be modified. (See section 10-2-7. "Selecting Keyframes.") If PGM
output is connected to a monitor, the status of the selected keyframe is output to the
monitor.

Modify the keyframe.

Changing KF DUR and INTERP
Use the settings in the USER PATTERN menu to change the parameters. (See sections
10-2-11 and 10-2-12.)

Changing the DVE modify item
Open the DVE MODIFY menu to display the status of the selected keyframe. Use the
parameters to make any changes. When connected to a monitor, you can check the changes
viewing the monitor.

After the all modified settings are made, press the OVERWRITE button to overwrite the
keyframe. The modify setting currently made is not applied to the keyframes unless the
overwrite is performed. Also, if the keyframe is changed without overwriting, all modified
settings will be lost.
10-3-3. Deleting User Patterns
This procedure deletes all setting information in a user pattern.
 Select the pattern to be deleted under the SELECT item in the USER PATTERN menu.

Set the DELETE item to ON in the USER PATTERN menu.

Press F3 to delete the user pattern. If the DELETE is set to OFF, pressing F3 will cancel
the operation.