FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 149 / 250

135
NOTE
For details about the SEQUENCE menu, see section 11-2-1. "Displaying the
SEQUENCE Menu" For details about the SEQUENCE editing keypad, see section
11-2-4. "SEQUENCE Mode (Keypad)."

Playback / Stop Sequence with BLACK TRANS
The BLACK TRANS button can be used for playback and stop button. Once this function is
assigned to BLACK TRANS (see the procedure below), it works same as the
PLAY button on
the keypad.
 Press the OU SETUP button to open the OU SETUP top menu.

Turn F1 to select 2.USER BUTTON. Press F1 or the DOWN button to open the OU
SETUP-USER BUTTON menu.

Go to Page 2 of USER BUTTON menu. Turn F1 to select S_PLAY for BLACK TRANS.
Press F1 or ENTER on the keypad to confirm the change.
Lit Indication of sequence function assigned BLACK TRANS button
Button Indication Description
Lit Green Pausing sequence
Lit Orange Playing sequence
Unlit No sequence selected or no step to be played back.
11-3-1. Playback (Normal / Loop / Step)
Pressing PLAY performs AUTO PLAY of the sequence and AUTO PLAY automatically stops
after playing the last step (Normal playback).
NOTE
Verify that SEQ above the keypad is lit orange, if AUTO PLAY is not executed by
pressing
PLAY . If the button is not lit orange (unlit or lit green), press SEQ to illuminate
orange. The keypad will be switched to SEQUENCE mode.

Loop Playback
When LOOP in the menu set to ON, loop playback is enabled. The switching between the last
and first steps is executed by a cut. To make switching smoother, use the same settings both
for last and first steps. Pressing
PAUSE stops loop playback.

Step Playback
Since the sequence play is normally performed to the last step (Normal playback), the single
step playback can be also selected. In step playback mode you can also specify a step
number. To do this, select a sequence number and change the mode to step playback by
changing the PLAY MODE item to STEP from ALL.