FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 113 / 250

99

Press the DVE PGM button in the M/E2 group of the menu section. The DVE PGM
button now lights up orange. At the same time, the DVE MODIFY menu for the PGM bus
is opened, and LINE DVE modify operations are enabled.

To Open DVE MODIFY menu for M/E2PST Bus
In this procedure example, assume that the DVE ON/OFF function has been assigned to
USER2.
 To apply the M/E2ST bus to LINE DVE, press USER2 to turn PST LINE DVE to ON. The
selected signal bus button on the PST bus lights up orange.
<HVS-16/24OUA>
When turning the PGM LINE DVE to on, the DVE PST button in the M/E2 group of the
menu section lights up green.
<HVS-12ROUA>
When turning the PGM LINE DVE to on, the WIPE/DVE MODIFY button in the M/E2
group of the menu section lights up green. Press WIPE/DVE MODIFY to light up to
orange.

Press the DVE PST button in the M/E2 group of the menu section. The DVE PST button
now lights up orange. If it has lighted up green, press the DVE PST button again to light it
up orange. The DVE MODIFY menu for the PST bus is opened, and LINE DVE modify
operations are enabled.

KEY1, KEY2 and KEY3
LINE DVE for the keys can also be set in the same way as for the PGM bus and PST bus.
The settings for M/E1 are the same as for M/E2.
IMPORTANT
If no DVE channel is available, the LINE DVE function cannot be used, and even if a
button is pressed, its light will not be turned on. Release the DVE transitions of BKGD,
KEY1, KEY2 or KEY3 or any other LINE DVE functions before pressing the button
again. (For details on the number of DVE channels, refer to section 6-9-8. "DVE
patterns and number of channels".) Which bus settings are to be performed on the
DVE MODIFY menu is determined by the color in which the DVE-PGM, DVE-PST,
DVE KEY, DVE KEY2 or DVE KEY3 button lights up in the M/E2 (or M/E1) section of
the menu section. When a button is pressed, the DVE MODIFY menu for the bus
whose button light is orange is opened.
LINE_DVE_ON/OFF buttons
M/E2PGM M/E2PST M/E2KEY1
USER
1
USER
2
USER
3
USER
4
USER
5
 Press the related button.

Press the related button to open the menu.
SYSTEM M/E 1 M/E 2
STATUS GPI
FILE
FUNC
SETUP
OU
SETUP
MU POS
BKGD
KEY2 KEY3
MATT
MASK MATT
MASK MATT
MASK WIPE
PATT
EDGE
SHDW
CK
PREV
KEY1
TRANS
EDGE
SHOW
MATT
BUS
STILL
EDITOR
SWAP
COPY M/E BLOCK
(PASET)
POS
ROT
EDGE
BORDER
EFFECT
CROP
WARP
KEY1
OVER
CK
MODI
WIPE
PGM
DVE
DVE
PST
DVE
KEY1 DVE
KEY2
DVE
KEY3
BKGD
KEY2 KEY3
MATT
MASK MATT
MASK MATT
MASK WIPE
PATT
EDGE
SHDW
CK
PREV
KEY1
TRANS
EDGE
SHOW
KEY1
OVER
CK
MODI
WIPE
PGM
DVE
DVE
PST
DVE
KEY1 DVE
KEY2
DVE
KEY3
BORDER SUBEFF
TRAIL HILITE
HVS-16/24OUA
HVS-12ROUA
KEYPAD SYSTEM / TRANSITION
SYS
MU
SETUP
OU
SETUP
FUNC
FILE
M/E
M/E2
M/E1
TRANS
BKGD
KEY1
TRANS
BKGD
KEY1
COPY
COPY
WIPE
PATT
KEY2
WIPE
PATT
KEY2
SWAP
PASTE
KEY3
KEY3
BLOCK
ADD DEL
EVENT
INC
INC
DEC
DEC
+/-
SEQ
7
DVE-PGM
4
DVE-PST
1
WIPE-MOD
0
INS
USER
PATT
8
DVE-KEY1
5
DVE-KEY2
2
DVE-KEY3
RECALL CLEAR
STATUS
9
PLAY
6
PAUSE
3
ENTER
OVERWRITE
WIPE/DVE
MODIFY
WIPE/DVE
MODIFY