FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 90 / 250

76
6-4. Key Transitions
The key transition operation is described here using the M/E2 KEY1. When a fill signal and key
signal are input to IN01 and IN02 of the MU rear panel, the keys are set as shown below.
 Press the KEY1 button in the M/E2 group of the menu section to display the KEY1 menu.

Use the UP/DOWN button to align the cursor with the top row of the KEY1(1/6) menu.

Use KEY TYPE, INSERT-TYPE, INSERT-SIGNAL (fill signal), and SOURCE-SIGNAL (key
signal) to confirm that the selections are made as shown in the figure below. If the settings
are different, turn the respective control button (F1 to F4) to make the settings below.

Press the KEY1 button in the transition section to light it. For a CUT transition, press the
CUT button to light it. For a MIX transition, press the MIX button to light it. For a pattern
transition, press the WIPE button as shown in the figure below, and then use the left pattern
buttons to select a pattern. The DVE WIPE lamp turns on when a DVE pattern is selected.

Execute the transition.
<HVS-16/24OUA>
Press KEY1-AUTO. If the key is on-air, the lamp on the KEY1-AUTO button lights.
<HVS-12ROUA>
Press AUTO. If the key is on-air, the ON lamp on the KEY1 button lights.

For details about key setup, refer to sections 5-6. "Key Setup", 5-7. "Key Adjustments", and
5-8. "Key Mask and Invert".

For details about transition setup, refer to sections 6-9. "Other Transition Settings" and 6-9-8.
"DVE patterns and number of channels".

The same procedure can also be used for transitions of modify patterns. The letter "M" is
displayed above the modify pattern. For details about the modification method of the pattern,
refer to sections 6-7. "WIPE Pattern Modify" and 6-8. "DVE Pattern Modify".

For details about selecting patterns, refer to section 6-6. "Selecting the Pattern".
KEY1(1/6) SOURCE/INSERT
KEY
TYPE
BUS
GAIN
1.0
TYPE
BUS
KEY SIGNAL
CLIP
50
SIGNAL
IN01
TRANSP
0.0
SIGNAL
IN02
RATE
30
INVERT
OFF
TRANSITION
LIMIT
OFF
FAM
OFF
LEVEL
100.0
INSERT SOURCE
HVS-16/24OUA
AUTO AUTO
KEY2 KEY1
AUTO
DVE DVE DVE
TRANSITION RATE
KEY3
KEY3
WIPE
CUT
MIX
KEY1 KEY2
BLACK
TRANS
BKGD
KEY1
KEY2
KEY3
DVE WIPE DVE WIPE
NAM
MIX
PREV
REV
NOR
REV
WIPE
FAM
WIPE DIRECTION
LIMIT
BKGD
CUT
DVE WIPE
DVE
TRANS
FADER
AUTO
HVS-12ROUA
KEY3
BKGD
KEY2
KEY1
ON ON
WIPE DIRECTION
REV
ON
KEY3
DVE DVE DVE DVE
TRANSITION RATE
TRANS
PREV
BKGD
MIX
NAM
AUTO
KEY1
CUT
FAM
FADER
LIMIT
KEY2
WIPE
NOR
REV
DVE WIPE
BLACK
TRANS