FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 137 / 250

123
10-2-6. Creating New Keyframes
 Check that the LINE DVE is set to ON for the bus selected at the EDIT BUS item. If it is
OFF, change the LINE DVE item in the USER PATTERN menu to ON.

Check that the DVE MODIFY is set for the selected bus. The relevant menu button on the
menu section will light up orange. If not, press the button to light up orange.

Prepare an image to be the user pattern.

Press ADD on the keypad to create a new keyframe and save the image to it.
IMPORTANT
Use the keypad for the keyframe editing such as adding / overwriting / deleting
keyframes. If the USER PATT button above the keypad section is pressed (lights on),
the keypad changes to USER PATTERN editing. The editing buttons for user pattern
whose label is written in reverse video are enabled. See "User Pattern Mode
(Keypad)" below for more details about the edit buttons.
10-2-7. Selecting Keyframes (Menu/Keypad)
The number of the currently selected keyframe (
Current Keyframe
) can be checked under
the following parameters.
Section Parameter
USER PATTERN menu
DVE MODIFY menu Status information at the top right of the
screen.
USER PATTERN menu KF SELECT
Using the following keypad buttons allows users to move between keyframes.
Button Description
INC Steps forward one keyframe.
DEC Steps back one keyframe.
The keyframes can also be selected using the KF SELECT item in the menu.

USER PATTERN Mode (Keypad)
Press the USER PATT button above the keypad section (light on). The keypad changes to
USER PATTERN editing. The editing buttons for user pattern whose label is written in
reverse video are enabled.
Button Description
INC
Use to move between keyframes in the
forward direction.
DEC
Use to move between keyframes in the
reverse direction.
ADD
Used to add the current DVE
operational status as a new keyframe.
INS
Used to insert the current DVE
operational status as a new keyframe.
OVER-
WRITE
Used to write the current DVE
operational status to a selected
keyframe (current keyframe).
DEL
Used to delete a keyframe. (Press KF
DELETE (CLEAR) and then press
OVERWRITE(ENTER).)
COPY Used to copy a keyframe.
PASTE Used to overwrite a keyframe.
ADD , INS , DEL , OVERWRITE
buttons cannot be used when the
PROTECT is set to ON.
KEYPAD
ADD DEL
EVENT
INC
INC
DEC
DEC
+/-
SEQ
7
DVE-PGM
4
DVE-PST
1
WIPE-MOD
0
INS
USER
PATT
8
DVE-KEY1
5
DVE-KEY2
2
DVE-KEY3
RECALL CLEAR
STATUS
9
PLAY
6
PAUSE
3
ENTER
OVERWRITE
HVS-16/24OUA HVS-12ROUA
KEYPAD / EVENT
0
1 2 3
4
7
5
8
6
9
EVENT
INC
DEC
+/-
CLEAR
BANK1 BANK2
ENTER
RECALL
USER
PATT
SEQ
INC
DEC
DEL
COPY PASTE INS ADD
OVERWRITE