FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 88 / 250

74
6-3-2. WIPE/DVE Pattern Transitions
In WIPE transitions and DVE transitions, preset patterns need to be selected. The patterns
that can be selected in the transition section are the five types displayed on the five pattern
buttons. The WIPE/DVE pattern transitions are executed using the procedure below.
 Press the WIPE button of the background transition. It lights orange.

Select the NEXT output video signal in the PST bus. In the M/E bus, the on-air (PGM)
output bus lights red and the NEXT output bus button lights orange.

Press the BKGD button to light it (in TIE mode).

Press the pattern button to light it, and then select the pattern. After the DVE pattern is
selected, the DVE WIPE lamp lights up.
When the pattern you want to use is not displayed for the five pattern buttons in the
transition section:

Double-click one of the pattern buttons.

The pattern menu is shown in the menu display.

Turn the respective control (F1 to F5) to select the pattern that you want to use. You can
also press the control button, enter the pattern number with the keypad, and then press
ENTER.

The pattern that you want to use is shown in the transition section.

If necessary, set the transition direction using the WIPE DIRECTION option.

The BKGD text to the right of the pattern button lights up, and the transition rate is
displayed. The transition rate is enabled during the AUTO button transition. If necessary,
set the transition rate in the TRANSITION / BKGD menu. The default setting is 30 frames
per second.

Execute the transition using the AUTO button or the fader lever.

For details about transition setup, refer to 6-9. "Other Transition Settings".

The same procedure can also be used for transitions of modify patterns. The letter "M" is
displayed above the modify pattern. For details about the modification method of the
pattern, refer to section 6-7. "WIPE Pattern Modify" and 6-8. "DVE Pattern Modify".

For details about selecting patterns, refer to section 6-6. "Selecting the Pattern".
AUTO AUTO
KEY2 KEY1
AUTO
DVE DVE DVE
TRANSITION RATE
KEY3
KEY3
WIPE
CUT
MIX
KEY1 KEY2
BLACK
TRANS
BKGD
KEY1
KEY2
KEY3
DVE WIPE DVE WIPE
NAM
MIX
PREV
REV
NOR
REV
WIPE
FAM
WIPE DIRECTION
LIMIT
BKGD
CUT
DVE WIPE
DVE
TRANS
FADER
AUTO
HVS-16/24OUA
KEY3
BKGD
KEY2
KEY1
ON ON
WIPE DIRECTION
REV
ON
KEY3
DVE DVE DVE DVE
TRANSITION RATE
TRANS
PREV
BKGD
MIX
NAM
AUTO
KEY1
CUT
FAM
FADER
LIMIT
KEY2
WIPE
NOR
REV
DVE WIPE
BLACK
TRANS
HVS-12ROUA
KEY3
BKGD
KEY2
KEY1
ON ON
WIPE DIRECTION
REV
ON
KEY3
DVE DVE DVE DVE
TRANSITION RATE
TRANS
PREV
BKGD
MIX
NAM
AUTO
KEY1
CUT
FAM
FADER
LIMIT
KEY2
WIPE
NOR
REV
DVE WIPE
BLACK
TRANS