FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 67 / 250

53

Creating Signal Link Groups

Press the UP button to go back to the AUX LINK menu. In the AUX LINK menu turn F1 to
select LINK GROUP under SELECT. Press F1 or the DOWN button to display the AUX
LINK - LINK GROUP submenu.
Available Signals
BLAK, IN01 to IN28, STL1 to STL4,
STL5 ～ STL6 (option)
CB, WHIT, MAT1, MAT2, KEYA, KEYB

In the AUX GROUP submenu, turn F1 to select a group to be set.

Turn F2 to select a signal to be set for MASTER.

Set the SLAVE output signals (up to four) that link to the MASTER output signal.
NOTE
The same MASTER output signal cannot be selected twice. SLAVE output signals can
be selected multiple times.

Enabling AUX LINK
 Press the UP button to go back to the AUX LINK menu. Turn F2 to set ENABLE to ON.
This activates all AUX LINK groups.
Operation examples:
These examples assume that the five AUX output link groups and four signal link groups
were set as shown above.
Press AUX1 in the BUS SELECT- AUX section and select IN01 in the AUX/KEY bus:
-> IN02 is assigned to AUX2, IN03 to AUX3, IN04 to AUX4 and IN05 to AUX5.
Press AUX1 in the BUS SELECT- AUX section and select IN06 in the AUX/KEY bus:
-> IN07 is assigned to AUX2.
Press AUX8 in the BUS SELECT- AUX section and select STL1 in the AUX/KEY bus:
-> STILL2 is assigned to M/E1-PGM.
Select IN08 in the M/E1-PST bus:
-> IN07 is assigned to AUX9 and IN08 to AUX10.
Select a signal in the M/E2-A bus:
-> The same signal as M/E2-A bus selection signal is assigned to M/E2-B bus.
FUNCTION-AUX LINK LINK GROUP
1. IN01 IN02 IN03 IN04 IN05
2. IN06 IN07 ---- ---- ----
3. IN08 IN07 IN08 ---- ----
4. STL1 STL2 STL3 STL4 KEYA
5. ---- ---- ---- ---- ----
No.
1
MASTER
IN01
SLAVE3
IN04
SLAVE1
IN02
SLAVE2
IN03
SLAVE4
IN05
FUNCTION AUX LINK
1. AUX GROUP
2. LINK GROUP
SELECT
1
ENABLE
OFF