FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 165 / 250

151
14-7. Clip Adjustment
Clip settings can be selected from two types according to your system format; YPbPr (YCbCr)
clip or RGB clip. If set to Clip off in the menu, factory set default clip settings should be applied.
To set Clip adjustment, proceed as follows:
 Refer to section 14-4 "Assigning A Color Correction Channel" to assign a signal to the color
corrector channel.

Press the DOWN button to go to the COLOR CORRECTION (2/4) menu.

Turn F1 to select YPbPr or RGB under CLIP MODE. See section 14-7-1 "YPbPr Mode and
RGB Mode" about the difference in adjustments between YPbPr mode and RGB modes.
If YPbPr selected:
In the YPbPr CLIP line, use F2 to F4 to adjust the following parameters. (See the table below.)
Parameter Description Default Setting Range
YPbPr Y LV CLIP Clips Y signal White level. 109% 50% ~ 109%
YPbPr C LV CLIP Clips C signal White level. 111% 50% ~ 111%
YPbPr BLACK LV CLIP Clips Black level -7% -7% ~ 50%
If RGB selected:
Use F2 and F3 to adjust the following parameters.
Parameter Description Default Setting Range (unit)
WHITE CLIP Clips White level 300% 50% ~ 300%
BLACK CLIP Clips Black level -200% -200% ~ 50 %
COLOR CORRECTION (2/4) CH1/PGM
CC
MODE
SEPIA
CLIP
MODE
YPbPr
Y LV
109%
YPbPr
C LV
111%
SAT
25
BLACK
-7%
SEPIA
HUE
-160
Color corrector channel
Assigned signal