FOR-A HVS-12ROUA, Инструкция по установке и эксплуатации

Страница: 171 / 250

157

Warning Buzzer
Parameter Description Default Setting Range
BUZZER
TYPE * Sets buzzer type. TYPE1
TYPE1, TYPE2, TYPE3,
TYPE4, OFF
VOLUME Sets buzzer volume set. 20 0-31
TONE Sets buzzer tone. NORMAL LOW, NORMAL, HIGH
* Following four kinds of indication buzzer available:
(1) Operational alarm buzzer (three short beeps sound)
(2) Page overflow alarm buzzer (two short beeps sound)
(3) Confirm setting buzzer when rebooting system, initiating menus, saving/loading files, handling events,
etc.
(one long beep sound)
(4) Other indication buzzer for operational setting (one short beep sound)
TYPE1: Enables all four kinds of buzzer:
TYPE2: Enables all four kinds of buzzer, but uses one short beep sound for all.
TYPE3: Enables three kinds of buzzer except (1).
TYPE4: Enables only (3) and (4).
OFF:
Mutes all buzzer sounds.

Fader Limit ON/OFF in KEYER menu
Parameter Default Setting Description Refer to
KEYTRS
MENU
SHOW
SHOW Displays Fader Limit item
6-9-2
HIDE Hides Fader Limit item.

RIGHT side control mode and speed for KEY MASK and DVE CROP.
Parameter Default Setting Description Refer to
RENC
TYPE
NORMAL
NORMAL Turning clockwise increases value.
5-8-2
8-2-4
INVERT
Turning counter-clockwise increases value.
Joystick also moves inversely.
RENC
SPEED
NORMAL NORMAL,
HIGH
Select between normal or high speed of the
knob control.

Transition Information Display Mode for Background and Keyers (HVS-16/24OUA)
Parameter Default Setting Description Refer to
TRANS
DISP
HOLD
HOLD
Keyer (KEY1, KEY2 or KEY3) information
is only displayed during pressing a button
(KEY1, KEY2, or KEY3) in the Transition
section.
6-6-1
PRESS
Keyer (KEY1, KEY2 or KEY3) or BKGD
information is displayed when a button
(KEY1, KEY2, KEY3 or BKGD) or a bus is
selected in the Transition section.
* The transition information display in HVS-12ROUA is same as PRESS.

Setting FAM and NAM Transitions ON/OFF for Keyers( in KEYER menus)
Parameter Default Setting Description Refer to
KEYER
FAMNAM
DISBLE
DISBLE
Disables FAM and NAM transitions for
keyers.
6-4-1
ENABLE
Enables FAM and NAM transitions for
keyers.