Foma SO903iTV, Руководство пользователя

Страница: 198 / 390

196
i- α ppli
Running i- α ppli Automatically
<Auto start>
Enabling/Disabling Auto Start
Default Yes
Yo u c a n s e t w h e t h e r t o s t a r t i - α p p l i s o f t w a re
automatically on the FOMA terminal.
1
From the Menu, select [i-appli] → [i α ppli setting]
→ [Auto start] and press .
2
Select [Yes]/[No] and press .
Whether to enable the Auto start is set.
Setting the Start Date and Time
The i- α ppli software can be started automatically. You
can set the starting date/time and day of the week and
whether to use the software’s automatic start for each
i-
α ppli software.
1
From the list of i- α ppli software, select the software
and press (Func).
The Function menu appears.
2
Select [Auto start] and press .
Ｕｓｅｒ ｓｅｔ ＯＦＦ
ＳＷ ｓｅｔ Ｉｎｖａ
Ａｕｔｏ ｓｔａｒｔ
[User set]:
Set the staring date/time and day of the week for each
software.
[SW set]:
Set whether to start the software using the software’s
auto start function.
3
Select [User set] and press .
Ｓｔｙｌｅ ＯＦＦ
Ｄａｔｅ ２００７／０７／０１ Ｓｕｎ
Ｔｉｍｅ ０９：０３
Ｄａｙ Ｍｏｎ
Ｕｓｅｒ ｓｅｔｔｉｎｇ
4
Select a style of the Auto start time at [Style].
[OFF]:
Do not set the start time.
[D/T]:
Start the software automatically at the specified date
and time.
[Eyd]:
Start the software automatically at the specified time
everyday.
[Week]:
Start the software automatically at the specified time on
every specified day of the week.
5
Enter the date/time/day of the week.
 Enter the date/time/day of the week according to the
style of the auto start time selected in step 4.
6
Press (Complete).
7
Select [SW set] and press .
The SW set display appears.
8
Select [Valid]/[Invalid] of the Auto start function of
the software at [Set].
The Auto start is set.
● The Auto start does not operate in the following cases.
- When the FOMA terminal is powered off
- During
a call/communication
- When the date/time is not set
- When another function is executed
- When the Alarm/Schedule alarm/Booking alarm is set to
start at the same time as the Auto start
- When the Lock all/PIM lock is set
- When the Omakase Lock is set
Setting i- α ppli for the Stand-by
Display
<i- α ppli stand-by>
Only one supporting software can be set for the i-
α
ppli
stand-by display. The software that supports the
i-
α
ppli stand-by display is identified by “ / / ”.

When the software using network transmission is set for
the i- α ppli stand-by display, it may not operate properly
depending on the radio wave condition.

When you set the i- α ppli stand-by display from the i- α ppli
software list display, the image set for the stand-by display in
the Stand-by display is also changed.
1
From the list of i- α ppli software, select the software
and press (Func).
The Function menu appears.
2
Select [Stand-by display]
→
[Yes] and press .
The i-
α
ppli stand-by display is set and the icon (P.192) changes
to indicate that the software is set for the stand-by display.
To operate the software set for the i- α ppli stand-by display
Press ( ) in the i- α ppli stand-by display.
● The message confirming whether to start the i- α ppli
stand-by display appears when the FOMA terminal is
powered on if the i-
α ppli stand-by display is set. Select
[No] not to start it. Select [Yes] or leave it for a while to
start the i-
α ppli stand-by display.
● If the Lock all or PIM lock is set while you set the
i- α ppli stand-by display, the i- α ppli stand-by display is
temporarily terminated. When you cancel the Lock all or
PIM lock, the i-
α
ppli stand-by display reappears.
● The Web To cannot be used from the i- α ppli stand-by display.
● If an error which could terminate the i- α ppli stand-by
display occurs, the time of error occurrence can be
checked in the stand-by error history.
● If a security error occurs in the i- α ppli stand-by display,
“ ” (Stand-by SW error) appears in the stand-by display.
Terminating the i- α ppli Stand-by
Display
The i- α ppli stand-by display is terminated and the
normal stand-by display is set.
1
From the list of i-
α
ppli software, select the software
and press (Func).
The Function menu appears.