Foma SO903iTV, Руководство пользователя

Страница: 40 / 390

38
Before Using the Handset
 Note that the call (communication) time and stand-by time may be reduced to about half of the time indicated
above depending on the operating environment such as the charge level of the battery, how functions are
set, and temperature, and radio wave condition in the area where a call is placed (outside of the service area
or area with weak radio wave condition). Similarly, the call (communication) time and stand-by time become
shorter than the above when you use i-mode communication. Besides calls and i-mode communication, the
battery time is also reduced when you are composing i-mode mail, starting a downloaded i-
α ppli or i- α ppli
stand-by display, performing data communication, executing multiaccess, using the camera, watching/
recording a One Seg program, and using the MUSIC Player.

The One Seg watching time changes depending on the operating environment such as the charge level of
the battery, how functions are set, and temperature.
How to Charge the FOMA Terminal
Charge the battery pack using the optional Desktop Holder SO06 with the FOMA AC
Adapter 01/02 connected. Make sure to see the user’s manuals of the Desktop Holder
and AC Adapter. The battery pack cannot be charged alone.
1
5
2
3
4
I n s e r t t h e c o n n e c t o r
h o r i z o n t a l l y w i t h t h e
engraved side facing up.
AC adapter
AC adapter
Terminal
Charge indicator
1
Insert the connector of the AC adapter horizontally
with the engraved side facing up into the terminal (the
side labeled “AC
アダプタ ”) of the desktop holder.
2
Lift the power plug of the AC adapter and plug it
into an AC 100 V outlet.
3
Insert the FOMA terminal, which has the battery
pack attached, to the desktop holder and push it
into place.
Charging starts and the red charge indicator is turned on.
The indicator is turned off when charging is completed.
When you charge while the FOMA terminal is powered on
The battery level icon flashes and the Charge sound is
heard. When charging is completed, the icon changes
from flashing to lighting and the Charge sound is heard.
 You can set to mute the Charge sound with the Set
basic tone (P.104).
 You cannot perform data communication while
charging.
When there is a missed call or unread mail/SMS/message
during charging
The charge indicator is also used as the incoming
indicator. The charge indicator flashes in the indicator
color for a missed call at about five seconds interval
while it is lighting in red. Note that this is not a
malfunction of the battery pack.
4
When the charging is completed, lift to remove the
FOMA terminal while holding the desktop holder.
5
Remove the power plug of the AC adapter from the
AC 100 V outlet.
■ Charging with the AC adapter only
Insert the connector horizontally
with the engraved side facing up.
Open the
terminal cover.
Release buttons
 To remove the AC adapter, make sure to pull it horizontally
while holding the release buttons pressed. Pulling it
forcibly may cause malfunction.
■ Charging with the DC adapter
With the optional FOMA DC Adapter 01/02,
you can charge the battery pack by using
the cigarette lighter socket of a vehicle
(12 V/24 V). For details, see the user’s manual
of the DC adapter.
Power
indicator
Connector
Charge indicator
Plug
Inser t the connector
h o r i z o n t a l l y w i t h t h e
engraved side facing up.
Open the
terminal
cover.