Foma SO903iTV, Руководство пользователя

Страница: 170 / 390

168
i-mode/i-motion/i-Channel
Displaying the i-Channel
1
Press (i.ch) in the stand-by display.
The channel list appears.
2
Select a channel and press .
● You may receive specific information when the channel list
is displayed, depending on the terms of use.
When You Receive i-Channel
→ 最高3０℃ １０ Telop
W h e n y o u re c e i v e i n f o r m a t i o n , t h e i n f o r m a t i o n i s
automatically run as Telop text on the stand-by display.
To display the channel list
Press (i.ch).
To display the Telop text on the sub-display
Fold the FOMA terminal and press (P.31).
● When you receive i-Channel information, “ ” → “ ” flashes.
Even if you receive information, the FOMA terminal does
not sound the ring tone or vibrate, and the incoming
indicator does not operate, either.
●
If you change the host, the Telop text may be turned off
and information may not be automatically updated. To
receive latest information, press
(i.ch) and display the
channel list. The Telop text starts running automatically.
● You can change the i-Channel host using the Host
selection (P.161). Normally, you do not need to change the
host.
●
When the FOMA terminal is powered off, outside of the
service area, or in poor radio wave condition, you may
not be able to receive information. When you receive
information by pressing
(i.ch), the Telop text is
automatically displayed in the stand-by display.
● Telop text is not displayed in the following cases.
- When the Lock all is set
- When the PIM lock is set
- When the Omakase Lock is set
- When the Public mode (Drive mode) is set
- When the UIM is not inserted
- When the i-Channel or i-mode service is canceled
Changing the i-Channel Settings
Setting the Telop Text
Default Std
You can set the display speed of the Telop text and
also turn off the Telop text.
1
From the i-mode menu, select [i-Channel] →
[Ticker] and press .
The Ticker display appears.
[Stand-by]:
Set the Telop text of the stand-by display used for the
main display.
[Sub display]:
Set the Telop text used for the sub-display.
2
Set the speed for displaying the Telop text at
[Stand-by]/[Sub display].
Select from [Fast], [Std], and [Slow].
To turn off the Telop text
Select [OFF].
Restoring the Default Settings
You can delete saved i-Channel data and reset the
Ticker settings to the default settings.

If an i-motion or i- α ppli is set for the stand-by display, the
Ticker settings are not reset.
1
From the i-mode menu, select [i-Channel]
→
[Reset
i-Channel] and press .
The screen for confirming whether to reset the i-Channel
data appears.
2
Select [Yes] and press .
The i-Channel is reset.