208
Watching TV
Before Using TV
■
TV antenna
When you watch One Seg, extend the TV antenna as
illustrated below. When the One Seg reception is poor,
change the direction of the TV antenna or the location
of the FOMA terminal.
Do not use force to change the direction of the TV antenna.
Using the TV antenna
1
Raise the TV antenna.
2
Extend the TV antenna.
3
Change the direction.
2
1
3
3
Putting the TV antenna back
1
Push the TV antenna down until it stops.
2
Put the TV antenna back while aligning the notch at
the top of the TV antenna with the counter part.
If you use force to put the antenna back without
confir ming the correct orientation, it may cause
malfunction.
2
1
Counter
part
Notch
■
The display that appears when One Seg is used for
the first time
When One Seg is activated for the first time, the display
for confirming the notabilia of the service appears.
Check the contents and press
(OK) (P.210).
■
Battery level
If you try to activate One Seg with the battery level low, the
screen for confirming whether to activate One Seg appears.
If you select [Yes], One Seg is activated. When the battery
level becomes low while watching One Seg, the screen for
confirming whether to quit One Seg appears. When you
select [Yes], One Seg is terminated.
When the battery level becomes low, “
”/“
”/“
” flashes
while watching One Seg and “
”/“
”/“
” flashes while
recording a One Seg program.
When the battery level becomes extremely low while watching
or recording a One Seg program, One Seg is terminated.
When you are recording a One Seg program, the video
recorded up to this point is saved automatically.
■
When there is an incoming call, etc. while watching
One Seg
When receiving a voice, videophone, or PushTalk call while
watching One Seg, you can answer the call by pausing
video and sound. After the call is terminated, the screen for
confirming whether to use Time shift play appears. When you
select [Yes], Time shift play is started.
When receiving i-mode mail, SMS, Message R/F while
watching One Seg, the incoming mail display appears. The
display restores when mail reception is completed. (When the
Mail telop disp set is set to [OFF] and Dur multi task disp is
set to [Prefer operat.])
When the Alarm, Schedule alarm, or Booking alarm time comes
while watching One Seg, the alarm is displayed. The display
restores when you stop the Alarm or Schedule alarm and press
or
in the display informing the release of the alarm.
When you stop the Booking alarm, the screen for confirming
whether to activate One Seg appears and you can activate it.
●
When the UIM is not inserted, you cancel the subscription
to DoCoMo, or you temporarily suspend using the FOMA
service, you cannot watch One Seg.
●
Even when you insert the UIM for which you subscribe to
DoCoMo, you may not be able to activate One Seg if you
repeatedly watch One Seg in the condition the FOMA terminal
cannot communicate such as when the FOMA terminal is
outside of the service area or in the Self mode. In that case,
try to activate One Seg in the condition the FOMA terminal
can communicate by moving into the FOMA service area.
●
When you activate One Seg for the first time, activate it
within the FOMA service area.
●
Even if the data may be lost or changed as a result
of malfunction, repair, or other handling of the FOMA
terminal, under no condition will DoCoMo be held liable
for any damaged or lost data saved in the FOMA terminal.
Furthermore, note that the saved information (such as
One Seg recorded videos or still images, TV links, or
information saved in the broadcast storage area) cannot
be moved when you change your FOMA terminal or have
it repaired.
●
Because the life of the battery pack becomes shorter,
do not watch One Seg for a long period of time with the
battery being charged.
Setting Channels
<Set channel list>
To use TV, you need to perform the channel setting and
save the channel list beforehand. When you watch TV,
select a channel list suitable for the current location.
You can save up to 10 channel lists, 62 broadcast
stations for each list.
Saving a Broadcast Station to the Channel
List Automatically
<Auto channel set>
B r o a d c a s t s t a t i o n s t h a t c a n b e re c e i v e d a re
automatically searched and saved to a channel list.
When you perform the Auto channel set, extend the TV
antenna fully.
1
From the Menu, select [Entertainment]
→
[One
Seg]
→
[Set channel list] and press
.
チャンネルリスト1
東京
大阪
神奈川
Set channel list
When no channel list is saved
Follow step 3 to 4.
Содержание SO903iTV
