Foma SO903iTV, Руководство пользователя

Страница: 240 / 390

238
Data Display/Edit/Management
Using the FOMA Terminal with
a PC
<Memory mode>
When you connect the FOMA terminal to a PC using
the FOMA USB Cable (optional), you can use it as
an external drive to read/write data on the microSD
memory card.

The operating environment for using the FOMA terminal
connected to a PC is as follows.
Item Required environment
C o n n e c t i o n
cable FOMA USB Cable (optional)
PC main unit PC with a USB port (Universal Serial Bus
Specification 1.1 compliant) that can be used
to connect the FOMA USB Cable (optional)
OS Windows 2000 Professional (SP3 or later),
Windows XP,
Windows Vista (Japanese version)
1
Connect the FOMA terminal and PC using the
FOMA USB Cable (optional).
3
1
2
USB connector
External
connection
terminal
Inser t the con-
nector horizontal-
ly with the label
side facing up.
External connection
connector
FOMA USB Cable (optional)
USB terminal
The notification icon “ ” (USB cable
cncted) appears in the stand-by
display.
2
Press (Link) in the stand-by display, select [ ],
and press .
Ｃｏｍｍｕｎｉｃａｔｉｏｎ ｍｏｄｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
ＵＳＢ ｍｏｄｅ ｓｅｔｔｉｎｇ
[Communication mode]:
Perform packet and 64K data communication, and
send/receive data.
[Memory mode]:
Read and write data from/to the microSD memory card.
3
Select [Memory mode] and press .
The Memory mode is set and “ ” changes to “ ”.
On the PC, “
リムーバブル ディスク ” is displayed for the
microSD memory card.
●
If the FOMA terminal is not connected to a PC correctly or
the battery level is very low or 0, not only data cannot be
sent/received, but also it may be lost in some cases.
● Do not unplug the FOMA USB Cable (optional) during
reading/writing data. If you do so, not only data cannot be
sent/received, but also it may be lost in some cases.
● Do not format the microSD memory card using a PC, etc.
Make sure to format it on the FOMA terminal.
Terminating the Memory Mode
To remove the FOMA terminal from a PC, perform the
procedure to safely remove the hardware on the PC in
advance, which is slightly different for each OS.
Example: When using Windows XP
1
Double-click the task tray icon [ ]
（ハードウェア
の安全な取り外し） on the Windows desktop.
2
Move the pointer to [USB 大容量記憶装置デバイス ]
and click [ 停止 ].
3
Click [OK] and confir m that the hardware is
unmounted successfully.
4
Press (Quit) in the Memory mode display of the
FOMA terminal.
Ｃｏｎｎｅｃｔｉｎｇ
Ｄｏ ｎｏｔ ｕｎｐｌｕｇ
ＵＳＢ ｃａｂｌｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
5
Select [Yes] and press .
The Memory mode is terminated.
6
Remove the FOMA USB Cable (optional) from the
FOMA terminal and PC.
2
1
3
USB connector
External
connection
terminal
Pull out the cable
while holding the
release buttons
pressed.
External connection
connector
FOMA USB Cable (optional)
USB terminal