Foma SO903iTV, Руководство пользователя

Страница: 382 / 390

25
Command Outline/Parameter Input example
AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service)
notified from the network when packet communication is established.
AT+CGEQMIN=2,,64,384
AT+CGEQMIN=2,,64
AT+CGEQMIN=2,,,384
AT+CGEQMIN=
※ 1
AT+CGEQMIN=<cid> ※ 2
cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for
packet communication
n=None/64 The minimum uplink communication speed (kbps) used between
the FOMA terminal and the base station.
None: Permits all speeds (Default).
64:
Packet communication may not be connected in some cases.
m=None/384 The minimum downlink communication speed (kbps) used between
the FOMA terminal and the base station.
None: Permits all speeds (Default).
64:
Packet communication may not be connected in some cases.
AT+CGEQREQ=[<cid>] Sets the QoS (Quality of Service) requested to the network when
packet communication is originated. AT+CGEQREQ= ※ 1
AT+CGEQREQ=<cid>
※
2
cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for
packet communication
AT+CGMR Displays the version of the FOMA terminal in 16 digits. AT+CGMR
AT+CGMR=?
AT+CGREG=<n> Sets whether the network registration status is notified. AT+CGREG=1
AT+CGREG?
AT+CGREG=?
n=0 No notification (Default)
[&F][&W]
n=1 Notifies the registration status inside/outside of the service area in the
“+CGREG:<n>,<stat>” format.
stat=0: Outside of the service area, stat=1: Inside of the service area
(home), stat=4: Unknown, stat=5: Inside of the service area (visitor)
AT+CGSN Displays the manufacturing number of the FOMA terminal. AT+CGSN
AT+CGSN=?
AT+CLIP=<n> Sets whether the sender’s caller ID is displayed on a PC when
receiving 64K data communication.
When you enter “AT+CLIP?”, “+CLIP:n,m” appears.
m=0: Network setting that does not notify caller ID to the other party
when originating 64K data communication, m=1: Network setting
that notifies caller ID to the other party when originating 64K data
communication, m=2: Unknown AT+CLIP=0
AT+CLIP?
AT+CLIP=?
n=0 Does not display the sender’s caller ID (Default, when the
parameter is omitted).
[&F][&W] n=1 Displays the sender’s caller ID.
AT+CLIR=<n> Sets whether the recipient is notified of your caller ID when you
originate 64K data communication.
When you enter “AT+CLIR?”, “+CLIR:n,m” appears.
m=0: CLIR is not executed (always notifies), m=1: CLIR is always executed
(never notifies), m=2: Unknown, m=3: CLIR temporary mode (Default: No
notification), m=4: CLIR temporary mode (Default: Notification) AT+CLIR=0
AT+CLIR?
AT+CLIR=?
n=0 The terms of the CLIR service are applied (When the parameter is omitted).
n=1 No notification
n=2 Notification (Default)
AT+CMEE=<n> Sets the error report format of the FOMA terminal (P.28). AT+CMEE=0
AT+CMEE?
AT+CMEE=?
n=0 Displays “ERROR” (Default, when the parameter is omitted).
n=1 Displays using the “+CME ERROR:xxxx” format (xxxx are numerics).
[&F][&W] n=2 Displays using the “+CME ERROR:xxxx” format (xxxx are characters).
AT+CNUM Displays the home station number of the FOMA terminal using the
“+CNUM:,“home station number”,type”.
type=129: Does not include the international access code +,
type=145: Includes the international access code + AT+CNUM
AT+CNUM?
AT+CNUM=?
AT+CR=<mode> Sets whether the communication type is displayed before
displaying ”CONNECT” when the line is connected. AT+CR=0
AT+CR?
AT+CR=?
mode=0 Does not display (Default, when the parameter is omitted).
[&F][&W]
mode=1 Displays using the “+CR:serv” format.
serv=SYNC: 64K data communication, serv=GPRS: Packet communication
AT+CRC=<n> Sets whether the extended result code is used when receiving a call. AT+CRC=0
AT+CRC?
AT+CRC=?
n=0 Does not use (Default).
[&F][&W] n=1 Uses.
※ 1 Resets all cid to the default settings. ※ 2 Resets a specified cid to the default setting.