Foma SA702i, Руководство пользователя

Страница: 87 / 451

8 5
An
s
we
ri
ng
a
vi
d
eop
ho
ne
c
a
ll
M
a
ki
ng
/r
ec
ei
vi
ng
a
vi
de
op
hon
e c
a
ll
Answering a videophone call
Answering a videophone call
・ You can display a substitutive image instead of camera image when answering videophone calls.
1
Press
t
or
n
when receiving a videophone call.
2
Talk to the other party after the videophone call is connected.
3
Press
f
to end the call.
Operations while receiving videophone call
Press
p
[Function] for following operations during videophone calls.
Information
● Videophone call is not connected to Voice mail center, and are disconnected after the ring time has
elapsed even when activating Voice mail service, since Voice mail service is not available for videophone
calls, as of May, 2006.
● Incoming videophone calls are not forwarded to the devices incompatible with 64K videophone conforms
to the 3G-324M standard, even when activating Call forwarding service. Confirm the specifications of the
destination device before setting the forwarding destination.
● When receiving a videophone call from a number registered in Nuisance call barring service, the call is
disconnected after displaying the call rejection image guidance.
● Arrival act, such as Ring tone, Vibrator, etc., is not activated if the other party has dialed 32K videophone.
The call is not saved in Received calls.
● Substitute image turns to be " カメラオフ（テレビ電話） <Camera off (videophone)>" under PIM lock (Multimedia).
● When making a videophone call when the image size of the other party's terminal is set to Sub-QCIF, the
image of the other party is not displayed properly.
The message "Incoming videophone" and the phone number
etc. (or reason for not notifying Caller ID) are displayed on the
screen.
・
Press
f
to hold the incoming call.
■ Answering videophone with Substitute image
a
Press
C
.
・
When Videophone hands-free is set to "OFF", press
n
to
switch the mode to hands-free.
・
Connect Flat-plug earphone/microphone with a switch
(optional) etc., if you do not use hands-free.
■ Switching Substitute image and camera image
a
Press
t
.
■ Switching In-camera and Out-camera
a
Press
m
[Cam Sw].
・
You can switch the mode to Close-up mode in Out-camera.
J
P169
Call rejection Rejects and disconnects a call without answering. Information on the
call is saved in Rejected calls.
Call forwarding Forwards a call to registered forwarding destination.
J
P340
Record message Records voice/video of the other party.
ＸＸＸＸＸＸＸＸ
Ｉｎｃｏｍｉｎｇ ｖｉｄｅｏｐｈｏｎｅ
ＤｏＣｏＭｏ Ｈａｎａｋｏ
Ｆｕｎｃｔｉｏｎ Ｈｏｌｄ Ｃａｍ Ｓｗ