Foma SA702i, Руководство пользователя

Страница: 443 / 451

22
AT
c
CLIR=<n> Sets whether to send
phone number to remote
device when sending 64K
data communication.
＊ 2
<n>
0: Follows the service agreement
1: Does not send
2: Sends (default)
When "AT
c
CLIR?" is set, "
c
CLIR:
<n>, <m>" is displayed.
<m>
0: CLIR deactivated (always send)
1: CLIR always activated (never send)
2: Unknown
3: CLIR temporary mode
(default=does not send)
4: CLIR temporary mode
(default=send)
AT c CLIR=2
OK
AT
c
CMEE=<n> Sets whether to display
error report at FOMA
terminal.
＊ 1
Sets whether to display errors only
as "ERROR", or to report reasons by
numbers or characters.
<n>
0: Displays "ERROR" without result
code (default).
1: Uses the result code to indicate
the reason by numbers.
2: Uses the result code to indicate
the reason by characters.
When error report display is set as
n=1 or n=2, error reports are
displayed as follows.
" c CME ERROR:xxxx". (xxxx means
numbers or characters. "Error report
list"
J
P28)
AT c CMEE=0
OK
AT
c
CNUM
ERROR
AT c CMEE=1
OK
AT
c
CNUM
c CME ERROR:10
AT c CMEE?
c
CMEE:0
OK
AT
c
CNUM Displays Own number of
the FOMA terminal.
By executing "AT
c
CNUM", displays
in
c
CNUM:,"<number>",<type>
format.
<number> Phone number
<type>
129: International access code,
c
not included.
145: International access code, c
included.
AT c CNUM
c CNUM:," c 8190
12345678",145
OK
AT
c
CPIN Enter the security code of
UIM (FOMA card).
Enter PIN1/PIN2 code and PUK.
Refer to "Result code"
J
P29
(Enter PIN1/PIN2 code)
AT c CPIN="1234"
OK
(Enter PUK and new
PIN1/PIN2 code)
AT c CPIN="12345678",
"1234"
OK
AT c CPIN?
c CPIN:READY
OK
AT command Overview Parameter/Description Command examples
See next page