Foma SA702i, Руководство пользователя

Страница: 52 / 451

50
Time
a
nd
d
a
te
s
et
tin
g
Befo
re
us
in
g
S
A70
2
i
Time and date setting
Time and date setting
Setting time and date
You can set or correct time and date automatically.
・ Time and date can be entered between 0:00, January 1st, 2000 and 23:59, December 31st,
2099.
・ The set time and date appears on the screen or backside display.
1
Press
C
s s
7
s
1
.
2
Press
1
"Automatic".
The time and date is set.
・
Time and date is corrected automatically, based on the information acquired from
DoCoMo network.
■ Setting manually
a
Press
2
"Manual".
b
Enter time and date and press
C
.
・ Alternatively, press
S
to highlight and press dial keys, or press
J
to set time and date.
(When month or date is a number between 1 and 9, enter 0 to precede the number.)
<GPS time setting>
Set time using GPS
Time is corrected using GPS.
1
Press
C
s s
7
s
2
.
2
Press
1
"ON".
Positioning starts, and the time is to be corrected. (Positioning icon does not appear.)
・ Press
2
"OFF" not to set.
Information
●
Time correction is not available out of service area or under self mode.
● Under the poor radio wave condition, time correction may not be available.
●
The time corrected using GPS may have an error of a few seconds.
● Following functions are not available until the time and date is set.
- SSL session (Authentication)
＊
- i-
g
ppli auto start - Starting i-
g
ppli DX
- Shooting still image/movie - Recording by Voice recorder - Periodic notify etc.
＊
Some sites are available without setting time and date.
● The set time and date is to be displayed in the following functions.
- Redial - Received calls - Record message - Recording VoiceMemo-Call
- Received/Sent addresses etc.
●
The set time and date is saved even after changing the battery pack or after the battery runs out. However,
the time and date is reset by leaving the battery being run out for an extended period of time. In that case,
make the setting again.
● Time and date is corrected automatically by Time and date setting every time when turning the power on,
or by GPS time setting on every positioning for Position location etc.
● Positioning with GPS time setting ON is not saved to Location history.
Default Automatic
Default OFF