Foma SA702i, Руководство пользователя

Страница: 56 / 451

54
M
a
k
ing
a
c
a
ll
M
a
ki
ng
/r
ec
ei
vi
n
g
a
c
a
ll
Making a call
Making a call
Following instructions describe how to make a voice call and the procedure common in
making a voice call and videophone call.
1
Enter a phone number including the area code, on Stand-by
display.
2
Press
n
.
3
Press
f
to end a call.
Information
● A call can be disconnected by folding FOMA terminal while connected, when Closing action is set to
"Disconnect".
J
P65
● Do not cover built-in antenna while dialing/calling.
J
P29
● When a different screen is displayed during a call, press
c
to return to the phone-calling screen.
● Subscription to Multinumber service enables you to make a call by selecting a phone number from the
registered Multinumber.
J
P342
・ Include the area code even when calling from the same area.
・
Up to 26 digits of a phone number can be displayed on the
screen.
・
Numbers with 3 to 80 digits are recognized as a phone
number.
・
Press
c
to correct the phone number.
・ To reenter the phone number, hold down
c
for over a
second, or press
f
and return to Stand-by display.
To a fixed-line phone : Area code-prefix-number
To a mobile phone : 090-XXXX-XXXX/080-XXXX-XXXX
To PHS : 070- XXXX-XXXX
Signal tone is heard and dialing starts.
・
The busy signal tone is heard when the other party's line is
busy. Press
f
to end the call, and try to call later.
・
Alternatively, press
C
s
1
"Dial phone call", to make a call.
・ If the guidance message requires Caller ID notification, try to
call again after setting Caller ID notification.
J
P51, 57
・ If the other party's mobile phone or PHS terminal is turned off
or in an area where radio waves are hard to reach, a guidance
message informs that the connection cannot be made.
・
Hold down
n
for over a second, and Hands-free is
activated immediately after the call is connected.
・
Hold down
n
for over a second during a call, and you can
change the mode to Hands-free.
ＸＸＸＸＸＸＸＸ
Ｆｕｎｃｔｉｏｎ Ｓｅｌｅｃｔ Ｓｔｏｒｅ
ＸＸＸＸＸＸＸＸ
Ｄｉａｌｉｎｇ