Foma SA702i, Руководство пользователя

Страница: 104 / 451

102
Ed
it Gro
u
p
Ph
one
b
oo
k
4
Set each item.
■ Setting Icon group
a
Select and press
C
.
b
Select Icon group and press
C
.
■ Setting Group name
a
Select and press
C
.
b
Enter Group name and press
C
.
・ Up to 10 two-byte (Full Mark)/21 one-byte (Half Mark) characters can be entered.
[Only up to 10 characters can be registered as group name of UIM (FOMA card)
phonebook when two-byte (Full Mark) and one-byte (Half Mark) characters are
mixed or one-byte (Half Mark) Kana is included.]
■ Setting individual group settings such as Ring tone
a
Select the type and press
C
.
b
Press
1
"ON".
・ Press
2
"OFF" to release.
c
Set each item.
・ Individual answer message
J
P79 "Setting Answer message" Step 2
d
Press
p
[Define].
5
Press
p
[Save].
Information
● When Vibrator/Incoming-call lamp settings are set to "Melody link", the operation of vibration and
Incoming-call lamp are linked to Ring tone. However, if setting Ring tone to Melody to which no vibrator
pattern is registered, "Pattern 1" is applied.
● If the volume is set to "Not specify", the operation follows settings in volume setting.
● Priority in receive actions
- Ring tone
J
P117 - Vibrator
J
P120 - Receive display
J
P128 - LED
J
P134
: Sets Phone incoming group.
: Sets V.phone incoming group.
: Sets Receive mail group.
: Sets Message group.
: Selects Ring tone.
・ Following procedure:
J
P116 "Changing Ring tone or Chaku-motion" Step 3
to 5
: Selects Volume.
・
Press
1
"Specify" s adjust Volume and press
C
.
: Selects image (Not available for Receive mail group).
・
Press
1
"My picture" or
2
"i-motion" and select data.
: Selects Vibrator.
・
Following procedure:
J
P119 "Notifying incoming calls etc. with Vibration"
Step 3 to 4
: Selects Incoming-call lamp.
・ Following procedure:
J
P133 "Setting the lamp color of incoming calls" Step
3 to 4
: Sets Notice time (Available only for Receive mail group).
・
Enter Notice time and press
C
.