Foma SA702i, Руководство пользователя

Страница: 320 / 451

3 1 8
Al
a
rm
Ot
he
r co
nv
en
ie
nt
f
u
nc
ti
o
n
s
■ Setting priority of Alarm/Manner mode
a
Select and press
C
.
b
Press
1
"ON" or
2
"OFF".
5
Press
p
[Store].
appears on Stand-by display.
Information
● Some types of i-motion cannot be set as Alarm sound
or Alarm notice image.
● Up to 10 two-byte (Full Mark)/21 one-byte (Half Mark)
characters are displayed as the title on Alarm setting
list screen, when setting an image, i-motion, etc. with
a long file name.
● If you set i-motion including video and sound as
Alarm tone, a message appears to confirm that Alarm
notice image is changed to the i-motion set as Alarm
tone. If either Alarm tone or Alarm notice image is
changed, a message is displayed to confirm that the
other setting is changed back to the default.
Returning all Alarm settings to default
1
Press
C
s s
6
.
2
Select an Alarm and press
p
[Function]
s
2
"Reset".
3
Press
1
"Reset".
・
When pressing
2
"Reset all", enter the
terminal security code and press
C
.
4
Press
1
"Yes".
・
Press
2
"No" to cancel.
When the specified time comes
・ Alarm starts to sound at the specified time
according to the setting.
・ Press any key to stop Alarm sound. However, if FM
radio plays, Alarm does not stop by pressing
A
.
・ Without any operation, Alarm stops approximately 1
minutes later. When FM radio is set as Alarm tone,
FM radio ends approximately 1 hour later. In this
case, a notify icon appears on Stand-by display.
・ Press
J
to adjust the volume while playing FM
radio.
・ Under Snooze mode setting, Alarm sounds
repeatedly at preset intervals. Hold down
c
(
)
when FOMA terminal is folded) for over a second
to release Snooze mode. Snooze mode is
released after repeating 6 times.
・
If a function, such as call, is activated at the set
time, Alarm acts as follows.
- During a call, or receiving/sending a mail
Alarm starts after ending the call or receiving/
sending the mail.
- When the power is off
Alarm does not start when alarm start setting is
"OFF". The notify icon appears on Stand-by
display when the power is turned on.
- While shooting still/movie images,
connecting to i-mode, starting i-
g
ppli,
activating FM radio, playing Music Player,
playing VoiceMemo-Call/Record message,
recording Answer message, or editing texts
such as Text memo
Alarm starts ringing. Under Snooze mode,
display returns to each operation after
releasing Snooze.
- While GPS positioning
Alarm starts ringing after the positioning
finishes.
- Under PIM lock (Alarm), Lock all or Software
update
Alarm is not activated. The notify icon appears
after the lock is released or Software is
updated.
Priority within Alarms
If Alarm, Schedule alarm, or other alarms are set to
the same time, priorities of Alarms are as follows.
a
Periodic notify
Notifies all in registered order of
a
to
b
.
b
Alarm
(until releasing Snooze mode, if Snooze is set)
Rings all in registered order of
a
to
h
.
c
ToDo alarm
Rings only 1 Alarm with the earliest expiration
date.
d
Schedule alarm
Rings only 1 Alarm with the earliest start date.
・ If the time to activate Periodic notify comes while
Alarm/Schedule alarm/ToDo alarm is ringing,
periodic notify is started with each alarm
released.
・ If ToDo alarm is set to the same expiration date
and time, the last saved ToDo alarm rings.
・ If more than 2 Schedule alarms are set at the
same Start date and time, the Alarm with the
earliest ending date rings, and if the ending dates
are also the same, the last saved Schedule alarm
rings.
Information
● Alarm stops if a voice call/E-mail is received while
Alarm is ringing. However, by setting Receive
preference of E-mail to "Prefer user operation", Alarm
keeps ringing and the icon appears to indicate the
reception of E-mail.
ON Notifies according to the Alarm setting,
even under Manner mode.
OFF Notified according to Manner mode
setting, under Manner mode.