Foma SA702i, Руководство пользователя

Страница: 426 / 451

5
Universal Serial Bus (USB) controller or
USB (Universal Serial Bus) controller:
FOMA SA702i
FOMA SA702i Command
＊
FOMA SA702i Modem
＊
FOMA SA702i OBEX
＊
＊
Displayed only on Windows 98/Me.
■ Checking on Windows 98/Me/2000
a
Click " スタート <Start>"
s
" 設定
<Settings>"
s
" コントロールパネル
<Control Panel>".
b
Double-click " システム <System>".
c
Click " デバイスマネージャ <Device
Manager>" tab.
・
For Windows 2000, click " ハードウェア
<Hardware>" tab, then " デバイスマネー
ジャ <Device manager>".
d
Click each device to check whether the
driver is properly installed.
・
Refer to P4, for driver types.
Uninstalling SA702i communication
configuration file (driver)
Uninstall the driver by the following procedure if
needed.
・
The uninstallation procedure from Windows XP is
described as an example.
・
Before uninstallation, disconnect FOMA terminal
from PC.
・
Uninstall the file from Windows XP or Windows
2000 after logging on with a name having
administrative right. Uninstalling with any other
name results an error. For procedures to set
administrative right of PC, contact the PC
manufacturer or Microsoft Corporation.
・
Before uninstallation, make sure no other
programs are activated. Save and exit all active
programs and restart uninstallation.
1
Insert the attached CD-ROM into the
CD-ROM drive of your PC.
2
Click " スタート <Start>"
s
" マイコン
ピュータ <My Computer>"
s
Right click
"[CD-ROM drive name]" and select
" 開く <Open>".
3
Double-click "SA702i_u.exe" in "USB
Driver" folder.
・
The file may be shown as "SA702i_u"
according to PC you use.
4
Click "OK".
Uninstallation starts.
5
Click "OK" and reboot Windows.
Setting up with FOMA PC configuration software
Setting up with FOMA PC
configuration software
FOMA PC configuration software allows you
packet communication or 64K data
communication with simple operations.
FOMA PC configuration software
The following settings are available for FOMA PC
configuration.
Easy setup
"FOMA データ通信用ダイヤルアップの作成
<Creating a dial-up connection for FOMA data
communication>" and "W-TCP
の設定 <W-TCP
setup>" can be performed easily by following the
instructions of the guide.
W-TCP setup
This function optimizes the settings in the PC
required for "FOMA packet communication".
Optimization of the communication settings with "W-
TCP
設定 <W-TCP setup>" is required for the best
communication performance.
Host (APN) setting
This function performs "Host (APN) setting" required
for "Packet communication".
In contrast to 64K data communication, phone
numbers are not used for FOMA packet
communication. Register the host name called APN
(Access Point Name) of each host and enter the
registration number (cid) in the phone number field.
APN "mopera.ne.jp" is registered to connect to
mopera as cid1, and APN "mopera.net" is
registered to connect to mopera U as cid3, by
default. Additional settings are required to connect
to other providers or Company LAN.
・ cid (Context Identifier) is the number compatible
with packet communication host (APN) and is
required to set APN registration to FOMA terminal.
Installing FOMA PC configuration
software
The procedure of installation on Windows XP is
described as an example.
・
Install the file on Windows XP or Windows 2000 after
logging on with the name having administrative right.
Installing with any other name results an error. For
procedures to set administrative right of PC, contact
the PC manufacturer or Microsoft Corporation.
・ Before installation, make sure no other programs
are activated. Save and exit all active programs
and restart installation.
1
Insert the attached CD-ROM into the
CD-ROM drive of your PC.
2
Click " スタート <Start>"
s
Click " ファ
イル名を指定して実行 <Run...>".
See next page